Does Dexter BrakeRite Electric Over Hydraulic Brake Actuator Work With Ford OEM Brake Controller

Question

Question:

does the dexter brakerite work with the ford factory brake controller

asked by: Tina

0

Expert Reply:

While you'll need an adapter, your Ford OEM brake controller does work with the Dexter BrakeRite Electric Over Hydraulic Actuator - Disc # DX82KR.

All you need to add is the Dexter BrakeRite SD Adapter for Ford/Chevy Integral Brake Controllers # T4845900.

expert reply by: Kyle S

0

Answer 1

It is not uncommon for certain factory brake controllers to have issues with electric over hydraulic brakes. This would be the first we have heard of this issue with a 2023 Ford F-350, but it is possible that the brake controller in your ford is…

view full answer...

Answer 2

Yes, it does! The Dexter BrakeRite Electric Over Hydraulic Actuator for Disc Brakes item #DX82KR is built to be weather resistant. It'll stand up to normal conditions. You just don't want to spray it directly or run it through a car wash.

view full answer...

Answer 3

Hey Dennis, I would actually avoid the Dexter actuators and instead go with the Hydrastar part #HBA16 as it's much more reliable and better performing. This is our installers favorite actuator.

view full answer...

Answer 4

The Dexter BrakeRite Electric Over Hydraulic Actuator #DX82KR will need the adapter installed to be compatible with your 2007 Ford F-250 brake controller. The correct adapter is the Adapter Module for BrakeRite Electric Over Hydraulic Actuator…

view full answer...

Answer 5

Good news, I can help you troubleshoot your Titan BrakeRite SD #T4835700 on your trailer. First thing to know is that a braking system is necessary when pulling a trailer equipped with brakes. The BrakeRite SD system is a good system for Electric…

view full answer...

Answer 6

The 2012 Chevy Suburban didn't have a plug under the dash for a brake controller installation, it has a bundle of loose wires under the dash above the emergency brake pedal assembly, as shown in the provided photo. The pigtail from your #90195 P3…

view full answer...

Answer 7

You are correct that certain electric-over-hydraulic actuators are not compatible with the factory brake controllers on certain trucks, such as the one on your 2012 Chevy Silverado. You are also right that there are adapters to resolve this issue but…

view full answer...

Answer 8

Since you would like to use your integrated factory brake controller on your 2013 GMC 2500HD I think your best option would be to use the Titan BrakeRite II Severe-Duty Electric-Hydraulic Actuator Kit #T4835700, and then use the Titan BrakeRite SD…

view full answer...

Answer 9

This is exact same adapter as the Dexter part number you mentioned with the part #DX35FR. Now with that said your 2022 Ford F-250 shouldn't need this adapter so that makes me think you just need to put your brake controller into hydraulic mode.

view full answer...

Answer 10

I was unable to find a reference to part 4814400 so I assume you were referring to the Titan BrakeRite Electric-Hydraulic Actuator #T4813102 . I contacted Titan who told me it was possible it burned the pump if it ran for a time and you should look…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Dexter BrakeRite Electric Over Hydraulic Brake Actuator Work With Ford OEM Brake Controller

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching