Correct Safety Cable Extension Length for 8" Long Adapter  

We offer an 8-inch cable extension kit, Roadmaster #RM-910648-8, rated for 8000-lbs and this includes two quick-links. Additional quick-links are offered too, part #RM-910022, and also Snap Hooks #RM-910031, to give you connection flexibility. All…

I have a solution for you, but I do not think getting a longer hitch pin is the answer. From the picture you provided, it looks like it is the S-hook of the safety cable that is getting behind your hitch pin and the pushing into the hitch lock side…

Yes, anytime you extend the connection point of a tow bar like the Blue Ox Avail part #BX7420 with a high-low adapter or dual hitch adapter you will need to extend the safety cables. For this, I recommend the Demco Safety Cable Extensions part…

The weight capacity listed for cables is for the pair. For example the Blue Ox 7' Safety Cables - 7,500lbs #BX88196 you referenced would have a 3,750lb capacity per cable. Since Roadmaster doesn't have a 7,500lb cable I'm assuming…

If you have the HappiJac 4800 series jacks you can add the Manual-to-Electric Conversion Kit #LC733960-182524. This will give you the ability to control the jacks from the included remote. The Remote #HJ54ZR will allow you to operate the jacks…

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

The 8 Inch Roadmaster Safety Cable Extensions #RM-910648-8 measure approximately 3-1/2 inches between the loops.

Roadmaster lists the height of the baseplate attachment point on a 2022 Jeep Wrangler Rubicon with factory tires at 16-1/4". This means you're 7-3/4" off from level and would need to use a high/low adapter like the Blue Ox #BX88241.…

When using D-ring adapters to flat tow your Jeep like what it sounds like you're doing, safety cables will generally just need to be attached to the vehicle's frame. What you can do is use some short cables to wrap around each frame rail and…

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

We do have installation instructions for the EcoHitch Invisi Trailer Hitch Receiver #306-X7186 and I have sent them to you in a separate email. As you mentioned in your question, there are 3 trailer hitches available for your 2012 Chevy Volt and they…

From a convenience standpoint, the #306-X7186 EcoHitch would probably be easier to live with, as you wouldn't need to remove the receiver when it's not being used but because there'd be a 10 inch height difference between the hitch and…