Bike Add-On for RockyMounts HighNoon FC Single Bike Rack

Question

Question:

Can the RockyMounts HighNoon FC accept the add-on monorail Item # RKY10005? Is the add-on fender compatible?

asked by: Joy G

1

Helpful Expert Reply:

The correct add-on for the RockyMounts HighNoon FC part # RKY87RR is the part # RKY27RR. This is compatible with fenders.

expert reply by: Jameson C

1

Answer 1

Both the RockyMounts MonoRail Solo 1 Bike Rack #RKY10007 and the RockyMounts HighNoon bike rack #RKY87RR are very stable. The RockyMounts MonoRail Solo has a slight edge because it sits a little closer to the vehicle causing a little less leverage.…

view full answer...

Answer 2

Good morning, Diane. That is a good question since the RockyMounts HighNoon #RKY87RR and the RockyMounts MonoRail #RKY10007 are quite similar. The HighNoon is essentially the newer version of the same RockyMounts bike rack. We started selling the…

view full answer...

Answer 3

The RockyMounts HighNoon FC Solo Platform Bike Rack for 1 Bike #RKY87RR does not give the option of adding a second bike. If you need to carry a second bike the best option would be to sell the HighNoon and buy the Thule T2 Pro XTR 2 Bike Platform…

view full answer...

Answer 4

Thanks for the picture! The best bike rack for your Magnum Ui6 Electric Bike is going to be the Yakima OnRamp item #Y96FR if your Volt has a 1-1/4" trailer hitch receive. The Yakima OnRamp has the capacity to carry two e-bikes weighing up to 66…

view full answer...

Answer 5

We have the perfect rack for carrying your e-bikes with fenders and step through frames! You will want the Thule Easy Fold XT part #TH903202. This rack will fit your 1-1/4 inch hitch, has frame clamps designed for your style of frame, is specifically…

view full answer...

Answer 6

Unfortunately, Thule doesn't offer a 1 bike version of the #TH93202 EasyFold XT bike rack. For a 1-bike platform type rack, I recommend the RockyMounts HighNoon FC Solo Bike Rack #RKY87RR. TheRockyMounts HighNoon rack has a 60 lb capacity, so…

view full answer...

Answer 7

Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…

view full answer...

Answer 8

Your best option for avoiding ground contact with a hitch mounted rack will be a platform style rack with a large or offset rise. This means the distance from the shank where the rack connects to the hitch and where the bikes actually sit is much…

view full answer...

Answer 9

I have good news! The Curt Trailer Hitch Receiver #C11256 referenced in your question that fits the 2018 Nissan Versa is also a confirmed fit for your 2019 Nissan Versa Sedan. The Class I hitch will use existing holes in the vehicle's frame for a…

view full answer...

Answer 10

It sounds like you are asking if the Curt 2 Bike Platform Rack #C18085 can hold an e-bike. The answer is most likely a no, but it depends on your e-bike. The Curt 2 Bike Platform Rack #C18085 can hold 2 bikes, weighing up to 45 lbs. per bike. If your…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Bike Add-On for RockyMounts HighNoon FC Single Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching