Does Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems Come w/ Safety Chain Loops

Question

Question:

Does this kit come with the puck inserts to hook the safety chains to?

asked by: Thanks

0

Expert Reply:

The puck inserts do not come with the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems - 5" Offset # GY83XR.

You can get those though with the Safety Chain Loops # C60617.

expert reply by: Kyle S

0

Answer 1

Hey Guy, so the Gen-Y fifth wheel to gooseneck adapter part #GY98GR can be used with a short bed Ram 3500 but it sounds like your real question is will this allow for turning clearance which that answer to that is "it depends." If the…

view full answer...

Answer 2

With a short bed truck it's definitely recommended that you use an offset ball to try and prevent the nose of the trailer from contacting the cab of the truck when making tight turns. The Gen-Y Hitch Gooseneck Trailer Hitch #GY83XR provides a…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Does Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems Come w/ Safety Chain Loops

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching