Can MORryde Locking RV Storage Box # MR43RR Fit Bracket Width of 26-7/8 inches

Question

Question:

Looking at MORryde locking rv storage box. I have 2016 Forest River Cedar Creel Silverback 5th wheel. The product qualifier says the bracket dimension for the old steps needs to be 27-28. My bracket measures 26 7/8inch id and 27inch od. Your video said the box can fit an opening from 26 3/4inch to 28. Will this box fit my brackets? How are the brackets adjustable?

asked by: William L

1

Helpful Expert Reply:

Yes, the MORryde Locking RV Storage Box # MR43RR will fit your bracket width. The brackets have multiple slotted holes that can be used which allows the width range that you mentioned.

expert reply by: Jameson C

1

Answer 1

Good to hear from you again, Gary! Yes, the MORryde Locking RV Storage Box #MR43RR is what you're looking for. This enables you to utilize that cavity for storage space, and it fits 26-3/4" to 28" opening widths. Does this look like it…

view full answer...

Answer 2

Since your narrowest entry width is 24", and your entry height is between 22" to 28", the best fitting Lippert Solid Step is part #LC713662. If your measurements are different you can pick the part number from the table below. Once you…

view full answer...

Answer 3

Hey Jim! We've had this box out recently and have taken some measurements. I can confirm that the outside length of the MORryde Locking RV Storage Box item #MR43RR is 25-3/4" without the brackets attached.

view full answer...

Answer 4

The difference is between just the MORryde Locking RV Storage Box #MR43RR and when you add the brackets at their widest setting. Just the box measures 25-3/4" but when you add the mounting brackets is when you'll see that 27-3/4" width…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 9

Hey Leo. The threshold mounting plate on the Lippert SolidStep 4.0 RV Steps item #LC65DX extends 6" past the opening of your RV's doorway. It's only 3/8" tall though. When the steps themselves are folded up and not being used…

view full answer...

Answer 10

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Answer 11

Hey TJ, thanks for reaching out. Those Goodyear Duratrac LT225/75R16 Trailer Tire with Eagle Aluminum Wheel #LH53MR are actually light truck (LT) tires, not trailer tires. The giveaway is the size designation: LT225/75R16. If they were trailer tires,…

view full answer...

Can MORryde Locking RV Storage Box # MR43RR Fit Bracket Width of 26-7/8 inches

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching