How To Install Gutter Extensions On A 2014 Jayco Jay Flight Swift SLX 154BH

Updated 08/14/2023 | Published 08/11/2023

Products Featured in This Question

RV Extended Rain Gutter Spouts - Rigid - Polar White - Qty 2

(68)

$8.50

LaSalle Bristol XTRM Universal Non-Sag Sealant for RVs - White - 10.1 oz - Qty 1

(80)

$27.46

Alpha Systems Butyl Tape for RV Weatherproofing - 20' x 1" x 3/16"

(242)

$26.09

Question:

Will these extensions replace the OEM extensions on 2014 Jayco Swift 154BH without modifications to the mounting points or the new extensions? How are they attached - snap on, screws, pop rivets, adhesive?

asked by: Tedd A

Expert Reply:

I can't say for sure which gutter extensions we used on your 2014 Jayco Jay Flight Swift SLX 154BH, but the installation for the RV Extended Rain Gutter Spouts # 372655-PW-A are very simple. You would just need to cut back some of the caulking around the gutter and remove a screw or two so that you can peel a couple inches of the gutter away from the wall to slip the flat rectangle portion of the extender behind the gutter and then press the gutter back up against the wall and screw it back in place. There should be a mounting screw at the end of the gutter that would also go through the extension to hold it in place.

I recommend using a bit of butyl tape # AL28FJ on the back of the gutter extension to help prevent water from leaking into the walls through the mounting screw. Once it's all screwed in place you can reapply sealant # 344270341437-1 around the edges to prevent water from getting behind the gutter or extensions.

expert reply by: Kevin C