To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Big loads and tall setups tend to lean hard through curves or when a gust hits the side. The Roadmaster Rear Anti-Sway Bar ties the rear axle to the chassis to keep things level. Its 1-3/8" diameter 4140 chromoly steel construction keeps the frame braced against the axle as weight shifts, reducing side-to-side sway and body roll. Corners feel flatter, quick maneuvers are steadier, and the ride stays predictable even on rough highways.
Crosswinds and passing trucks can push a rig around if the suspension flexes too much. This bar minimizes that motion by balancing weight transfer between the rear axle and frame. The result is less steering correction in windy conditions or when hauling heavy loads. You get a more planted, confident feel at highway speeds without constant wheel input.
This isn’t mild steel or soft rubber. The 4140 chromoly alloy gives the bar superior hardness and strength—nearly thirty percent better at resisting sway than typical setups. Polyurethane bushings hold up against oil, gasoline, and ozone, so they don’t mush out or crack over time. Less wear means tighter response and more consistent control mile after mile.
The kit comes with mounting hardware, lubricant for the bushings, and clear directions. It bolts to the rear axle and chassis without drilling, and it’s designed to avoid interference with common aftermarket parts. Once it’s on, the improvement in handling is immediate and maintenance is simple.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
As others have said the sway bar is good but the directions could be improved. Removing the old down link on the drivers side is a bit of a challenge as you can't easily remove the old bracket until you remove the downlink. Unfortunately you can't get the bolt holding the link to the bracket without supporting the fuel tank and removing the rear strap so that you can push the tank over far enough to get the bolt out. Another issue was the old U brackets holding up the old sway bar were on 3" centers where the new bracket is on 2 3/4" centers. This looks like an insurmountable problem until you remove the star washers holding the old bolts where you can see there is a slot which allows you to use the bolts included. The old bolts were both attached to a plate which kept made the center distance between the bolts non adjustable so using the old bolts is not an option. On the passenger side the plate holding the 2 bolts was connected to the axle connection for the height sensing proportioning valve. I removed the 3 bolts holding it, took out the plate and cut off the front most bolt and reinstalled the plate. Fortunately that allowed me to use the old bolt in the plate and for the front most bolt I used one from the kit and achieved the 2 3/4" center spacing needed for the new bracket. All of this would be nice to know when you tackle this job. Fortunately I had all the tools needed to complete the job. I found it easy to install the new bar despite its weight by lifting up one end of the sway bar and loosely attaching it to the the down link. I then did the other side and once both ends were attached I put the center of the bar on my hydraulic jack and lifted it into place. This made it a fairly easy job to position and attach the U brackets to the axle despite the heavy weight of the bar. A video of this process on an older (1998 vintage) Dodge Ram 2500 would be a big help.
Easy to install by myself in the driveway. I replaced both the front and rear anti-sway bars and the improved handling characteristics were noticeable immediately. Fantastic product!
I have a hard side slide in camper in the back of my pickup. This is the first time I installed an Anti-Sway Bar of any kind. It took me about 6 hours to install. But it works, and it works really well. I'm glad I took the time to install it.
I love this sway bar, and love the service and overall experience with etrailer. My F350 came with factory sway bars front and rear, and I'd replaced the rear bar several years ago, and was impressed with the difference it made. So, more recently I ordered the front bar to replace the smaller factory unit, and it again made a wonderful change for the better. Our Bigfoot truck camper is tall and heavy, but our rig handles wonderfully and has essentially no sway or rock in traffic or on bumpy roads. I highly recommend this sway bar.
1 of the best purchased I've made for my Fleetwood Discovery. All wandering is now gone. Took an afternoon to install (I'm a retired mechanic) and am very pleased with the outcome. I also purchased an Steering Stabilizer Shock a year before and I improved wandering maybe %25. Both purchases arrived (in Alaska) promptly and in good condition. I Will purchase from eTrailer.com again when needed.
After a year of usage, I couldn't be happier with the Roadmaster front and rear anti-sway bar kits. The rear kit for my W22 chassy, the mounting hardward would not fit properly. I call Roadmaster directly and they custom built the mounts, painted, and shipped within days.
Easy installation ,done by myself laying on my back in the driveway only took about 1 1/2 hours to do. I have a lift but didn't use it and I think it was easier on the ground for just one person. Sway bar made a big difference in the drivability of my 2003 E350 pleasure way class B
I'll upgrade the front factory bar to the HD Roadmaster bar soon
If you have issues with the handling of your Ford pleasure way start with this sway bar
This is a must have for your Motorhome. What a difference in the ride of the coach through the highway washes, the side winds and the side drift of the big rigs. This bar reduces the coach movement by as much as 80% I would say. The installation is easy for someone who is mechanically inclined and still doable for DYIer as long as you have the tools ( standard 1/2” drive tool set, low speed high torque drill for the holes in the frame and a 250 plus ftlbs torque wrench). I would highly recommend this Anti-Sway Bar.
a quick fix it to install sway bars front and rear.
I did this and just came home from 2400 mile trip.
installed rear only before we left, then at our destination installed front.
the drive back it handles wayyy better and it sits level now.
""your results may very-use at your own risk. ""
from etrailer.com
rear = RoadMaster 1259-109.
front = RoadMaster RM-1259-105 with RM-590063-00 bracket kit.
i'm sure over time they will flex and stress and start to lien again.
But for now it looks much happier. ( and level )
and i'm very happier with performance and drivability
Seems the big bars help distribute the load to both sides,
you can drive it with one hand now.
and when a truck passes, it's very manageable.
( this could be part the tires on it )
these can be installed in about 6 hours pretty easy.
The hardest thing is drilling the 8 holes in frame. ( 4 front 4 rear. )
We had to shift 2 brake lines over via and small bracket and covers lines with old fuel like to act as wear buffer.
After waiting 3 weeks the swaybar kit was drop-shipped from the factory. Received and discovered the bushing inserts were the wrong size (too small) for the bolts that were sent. Contacted Roadmaster support and provided them a photo and invoice as requested. The replacement inserts were approved and shipped out. I got metric bolts to go with the inserts I received. I will save the replacements for additional replacements.
The install was fairly straight forward.
Haven't had a chance to tow the 5th-wheel yet.
The anti sway bar is a big improvement when the truck bed camper is on. The installation took a bit longer than expected because the frame brackets don’t fit around an aftermarket B&W gooseneck hitch. I had to fabricate new top brackets and drill out the bottom brackets to widen the bolt pattern. Keep this in mind if you have a gooseneck hitch.
Received the product in a timely manner. The shipping company used I’d give a no star rating. I received the anti-sway bar bare out of a box or wrapper with the installation part box and a cut out piece of cardboard with the shipping label on it taped to the bare bar with about five yards of packing tape. The bar was scuffed, scratched and chipped with the RoadMaster label destroyed. I realize it’s going to be installed under the front of my motorhome but as much as it costed I would like to be the one to scratch and scuff it. If I was a company installing this on a customers vehicle I’d return it. I do not believe it was shipped from etrailer in this condition.
Great buying experience with ETrailer. Fast shipping and quality constructed part. Noticeable difference in controlling body sway. Very pleased with the bar and highly recommend Etrailer.
Excellent high quality product made a big difference in handling with heavy Artic Fox camper
Give poor rating regarding installation instructions
RM-1109-121 Rear Sway bar for 85 Chevyvan G30 RV. Install was pretty straightforward. I would mount the brackets to the frame first and then the sway bar to the axle. It’s easier to drill the holes without the sway bar getting in the way.
Before I replaced the shocks and upgraded the from sway bar and added the rear sway bar my G30 Chevyvan Winnebago was a wallow wagon. It took 110% focus to drive. Now it drives like a regular vehicle. Smooth. No leaning over when cornering. It’s night and day.
Fit perfectly. It made a world of difference in the handling of my truck. It was the best thing I've done to my truck.
All products were great.
Sway bar very good instruction not so good no torque spect. On bolts better pitcures
I purchased the Roadmaster front and rear sway bars because I got a Northern Lite 9-6 camper to go in the bed of my 2000 F250. I used the truck camper combo for 2 or 3 trips without the Roadmaster sway bars, the handling with the stock sway bars was down right scary at times when driving on winding canyon roads or in cross winds, It was very unnerving going around corners. Once I added the Roadmaster sway bars it made a huge difference in the handling of the truck, it is much easier to drive.
I added the sway bars, the Roadmaster active suspension leaf spring enhancement kit and upgraded aftermarket shocks to my truck. With these upgrades to the suspension the handling is very robust.
MADE A BIG CHANGE IN MY TRUCK FOR TOWING
Made a 200 percent improvement
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.