Recommended Hitch for a 2024 Lexus NX 350h

Question

Question:

I have a 2024 Lexus NX 350h and I am looking for a hitch with a 2" receiver. Is this something you have?

asked by: Tara

0

Expert Reply:

Yes, it is. To add a hitch with a 2" receiver to your 2024 Lexus NX 350h, I recommend the Curt Trailer Hitch item # C33NR. This hitch is custom fit and bolts to your Lexus with included hardware.

The Curt Trailer Hitch item # C33NR is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.

expert reply by: Jerred H

0

Tony C.

6/8/2024

2024 Lexus nx350h which hitch will not interfere with the kick sensor for the rear gate lift?

Jerred H.

6/10/2024

@TonyC None of them. They both block it. You're going to lose functionality around the 2" receiver with either the Curt item # C33NR or the Draw-Tite item # DT82QR.

Answer 1

I checked with Curt and I can confirm that yes, the Curt Hitch receiver #C33NR will indeed fit your 2024 Lexus NX350h. Please note that this hitch may interfere with your hands-free liftgate sensor and its functionality may be limited or lost. I have…

view full answer...

Answer 2

Yes, we do! To add a hitch to your 2024 Lexus NX 450h Plus, I recommend the Curt item #C33NR.This hitch is custom fit and bolts to your Lexus with included hardware. It does NOT fit the F Sport models. The Curt Hitch item #C33NR is a class III hitch…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C29VV will not interfere with the kick sensor function on your 2024 Lexus RX 350h. To get it to work however, you'll have to kick to either side of the receiver instead of swiping your foot under the bumper for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Welcome back, Yvonne! I recommend going with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C77MJ you were looking at. It has plenty of tongue weight for carrying heavy e-bikes (675 pounds of capacity, to be exact) and its a bolt…

view full answer...

Answer 12

Hey Leon! Your 23" bed depth is typical for newer Silverado 1500 trucks and will not cause a clearance issue. The Demco Autoslide #DM94AV has adjustable height settings of 15-1/4", 16-1/2", or 18" to help you achieve the…

view full answer...

Recommended Hitch for a 2024 Lexus NX 350h

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching