Is Kenda Karrier ST175/80R13 Trailer Wheel/Tire Balanced

Question

Question:

Does your trailer tires come balanced?

asked by: James

0

Expert Reply:

Trailer wheel and tires are not balanced typically which is why our wheel and tire combos like the part # AM31990 are not balanced. It doesn't really end up making a difference so we don't recommend it either.

expert reply by: Jameson C

0

Answer 1

Hi Bud, The Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel #AM31990 does not come balanced, though you can easily do so with the Counteract Tire Balancing Beads Single Pack for Trailers #CA66VR. These beads install right…

view full answer...

Answer 2

I'll start out by saying that we don't have specific specs on a Northern Tool Ironton trailer but I was able to locate a photo and because of the fenders, I don't believe you'll be able to go up to a larger wheel and tire; your…

view full answer...

Answer 3

Load range D is likely the highest you will find on an ST175/80R13 tire. This is going to be a significant capacity increase over your current tires. Your typical load range C has a max load of 1,360 lbs per tire at 50 psi while a tire like the…

view full answer...

Answer 4

Our trailer wheel and tires like the Kenda Karrier part #AM31990 that you mentioned do not come balanced. We do have balancing beads that you can use that will balance them for you like with the Counteract part #CA66VR which comes with enough to…

view full answer...

Answer 5

The closest tire size we offer to the ST180/70R13 tires on your trailer is the ST175/80R13 which will be about 3/4" taller than your current tires, and just under 1/2" narrower. I recommend the Karrier ST175/80R13 Radial Trailer Tire with…

view full answer...

Answer 6

Trailer tire speed ratings do use a letter code system. A tire rated L for speed means it can be operated up to 75 mph; a tire rated M for speed can be operated up to 81 mph. There are many other speed codes. A trailer tire that does NOT indicate any…

view full answer...

Answer 7

My recommended first step for you to take is to determine what tire size you would need. If you check the plate on the trailer frame near the coupler there will the VIN, axle capacities, as well as the trailer tire size and Load Range recommended.…

view full answer...

Answer 8

In height or total diameter, a 185/80-13 and 175/80-13 like part #AM1ST77 only differ by about 5/8 of an inch. The 185 would have a diameter of 24.65 inches while the 175 would have a diameter of 24.02 inches. The section width, or thickness of the…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

The D in 175/80D-13 indicates that it is a bias ply tire where as the R in 175/80r-13 indicates that it is a radial tire. The difference is how the steel belts inside are oriented. Bias ply tires are generally better in off road types of situations.…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Is Kenda Karrier ST175/80R13 Trailer Wheel/Tire Balanced

Product Page this Question was Asked From

Continue Researching