Parts Needed to Install Tekonsha Brake Controller in 2019 Entegra Odyssey E-450

Question

Question:

Looking to install brake controller on our 2019 Entegra odyssey e450 - which adaptor do index ? 3034 p? And will this work with any Tekonsha controller? Will it work with the Primus IQ?

asked by: Laura W

0

Expert Reply:

For your 2019 Entegra Odyssey E-450 motorhome the correct install harness for a Tekonsha brake controller like the Primus IQ (we don't have it currently) or the P2 part # 90885 is the part # 22292.

expert reply by: Jameson C

0

Answer 1

The Redarc Tow-Pro Elite Brake Controller part #RED63RR is a great option for a 2023 Jayco Redhawk 24B and can be plugged directly into the port in the dash (behind the spare change tray) using the Tekonsha Plug-In Wiring Adapter for Electric Brake…

view full answer...

Answer 2

For your 2022 Ford E-450 cutaway chassis the correct Tekonsha brake controller install harness is actually the part #22292. This is why what you have doesn't look like it would work with the 3035-P.

view full answer...

Answer 3

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 4

To install the Brake Buddy Stealth Supplemental Braking System item #HM39530 in your 2023 Greyhawk you will need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers item #3034-S. This connects to the wiring harness behind the dash of…

view full answer...

Answer 5

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 6

Since you are planning on using our etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates item #e74ZR, you will want the Roadmaster Direct-Connect Base Plate Kit item #RM-521453-5. These are confirmed to fit the 2023 Jeep Wrangler…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Hey Nelson, so you would need two separate systems since a supplemental braking system can only be used with a towed vehicle and a trailer brake controller can only control trailer brakes. Main difference is a supplemental braking system is designed…

view full answer...

Answer 11

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...