Propane Fittings Needed To Connect A Propane Tank To A Champion 3300 Watt Generator

Updated 07/05/2023 | Published 07/02/2023

Products Featured in This Question

Quick Disconnect Propane Hose - 1/4" Male NPT - 10'

(78)

$47.72

Thread Sealant Tape for Gas Lines

(83)

$11.06

MB Sturgis Quick-Disconnect Propane Adapter Fitting - Male Model 250 x 1/4" Male NPT

(89)

$17.38

Camco Low-Pressure LP Gas Regulator w/ 12' Long Hose

(55)

$68.17

Question:

I need a replacement hose for the Champion 3300W dual fuel generator. I saw this one on your site which might work, however, I need a regulator attached. Do you have such a hose with regulator attached? Thank you Quick Disconnect Propane Hose - 1/4 Male NPT - 10 Item # 37207-31135

asked by: Rick M

Expert Reply:

We do have some propane hoses with regulators already attached, but you'll still need a few adapter fittings to connect a propane tank to the quick disconnect fitting on your Champion generator. The easiest option is going to be using the Camco Low-Pressure LP Gas Regulator w/ 12' Long Hose # CAM57721 and picking up a 3/8" male flare to 1/4" female NPT fitting from your local hardware store and a quick disconnect fitting # 401132-MBS. You'll screw in the adapter fitting to the swivel fitting on the hose and then screw the QD fitting into the adapter.

I recommend using some thread sealant tape # 37207-30025 to prevent leaks from your connection points.

expert reply by: Kevin C