Will InfiniteRule Hitch Lock Fit Curt Channel Style Adjustable Ballmount

Question

Question:

Hi, Does the lock fit the Curt Channel lock? locking to lock the ball into the channel. I think I need around 3.75inch of length to be able to lock it in. thanks

asked by: Allan

0

Expert Reply:

I'm not exactly sure which Curt you're talking about, but I assume it is one like the # C45900 with the 3" wide channel. A 3-7/8" span on the # 34061074-D should fit but just barely, it will be tight. A better option would be the Andersen Rapid Hitch # AM3492 or Curt # C23556. The Curt lock has a 4-1/4" span to fit that channel and comes with a locking hitch pin with a 3-1/4" span as well for added security. The Andersen also has a 4-1/4" span for the locking pin and comes with a locking hitch pin.

expert reply by: Robin H

0

Answer 1

The only way to avoid using a reducer sleeve like the Curt #C45408 is to get a ball mount with a 3" shank and for that I recommend checking out the B&W Tow & Stow 3-Ball Mount #BWTS30049B which comes with the 3 common hitch ball sizes…

view full answer...

Answer 2

Hello Hal, Great question! It really would be nice if Toyota kept their receiver the same size as everyone else’s so any standard 2" lock would fit. The good news is that Infinite Rule actually made a lock specifically for the 2024+ Toyota…

view full answer...

Answer 3

To lock your B&W Tow & Stow 3-Ball Mount #BWTS30049B to your truck you actually only need one single locking hitch pin and for that I recommended checking out the InfiniteRule Hitch Lock #34061073-D which is a stainless steel construction.…

view full answer...

Answer 4

Yes, it will Mark. The InfiniteRule Hitch Lock for 2" Toyota Tacoma Hitches item #IR75FR has a longer span to accommodate the Toyota hitch receiver. Which they've recently started expanding to other vehicles besides the Tacoma. You will most…

view full answer...

Answer 5

Hey Charles, The Brophy #BH20 has a 13-1/4" from center of hitch pin hole to center of ball hole, which is a bit more than the B&W Tow & Stow ballmounts have so the closest option is going to be the B&W Tow & Stow 2-Ball Mount…

view full answer...

Answer 6

Hey William, so the 3 inch hitches do use the larger hitch pin diameter but the 2-1/2 inch hitches still use the smaller one. So with a reducer like the part #38735 technically you would use both sizes. If you check out the picture I attached you can…

view full answer...

Answer 7

For the 3 inch hitch of your 2021 Ford F-350 to determine if you need the 4-1/2 inch drop Tow and Stow part #BWTS30048B or the 7-1/2 inch drop part #BWTS30049B will be based largely on the trailers you plan to tow and how tall the coupler sits from…

view full answer...

Will InfiniteRule Hitch Lock Fit Curt Channel Style Adjustable Ballmount

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching