Ball Mount For 3" Hitch With A 1-7/8" And 2-5/16" Ball

Question

Question:

I was wondering if I can get a 3” hitch with a 1 7/8 ball and a 2 5/16 ball?

asked by: Mark T

0

Expert Reply:

We do have the B&W Tow & Stow 3-Ball Mount # BWTS30049B for a 3" hitch. This has a 1-7/8", 2" and 2-5/16" ball and is rated for up to 21,000 lbs. That one is the 7" rise/drop, we also have the # BWTS30048B for a 4" drop/rise

expert reply by: Jesse M

0

Answer 1

The Curt hitch part #C15800 is the highest capacity hitch we offer for your 2018 Ram 5500 cab and chassis. The hitch has a 20,000 lb trailer capacity and a 2,700 lb tongue weight capacity. The hitch is also made in the USA and has a 2-1/2 inch hitch…

view full answer...

Answer 2

We do have adjustable ball mounts that fit the 3" hitch on your 2018 Ram 2500 but there is not an option for an adjustable ball mount from Curt at this time; instead I strongly recommend checking out the B&W Tow & Stow 2-Ball Mount…

view full answer...

Answer 3

We have some options for fitting a 3 inch trailer hitch like what you have on your Ford truck. I attached a link to a page that has all of them. One of the more popular options is the B&W Tow & Stow #BWTS30040B.

view full answer...

Answer 4

Hey BK, thanks for reaching out! Most hitch pins don't have a weight rating, but the Gen-Y Hitch Pin and Clip #325-GH-099 does, and that's 32,000 lb towing. This will be the same whether you're using a hitch adapter or not. For a locking…

view full answer...

Answer 5

Hello Jack, Great question! B&W does not have a specific weight rating for the Trailer Hitch Receiver Lock for 3" Hitches - Flush - 3-1/8" Span - Stainless Steel #BW23FR, they have it on their site that it works for Class III, IV, and V…

view full answer...

Answer 6

Hey JD, The Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS88RR uses hitch pic lock #WS54CR, which has a shear strength capacity of 45,000lbs according to Weigh Safe.

view full answer...

Answer 7

So there is a B&W Tow & Stow that fits a 3 inch hitch and has a capacity up to 21,000 lbs, but not with a pintle hook. I checked directly with B&W to verify this for you. The 21k capacity is for the included 2-5/16" hitch ball, and…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Ball Mount For 3" Hitch With A 1-7/8" And 2-5/16" Ball

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching