Can the Outside Link Plate for Equal-i-zer Weight Distribution Systems Be Used on The Fastway e2 WDS

Updated 06/27/2023 | Published 06/26/2023

Products Featured in This Question

Replacement Outside Link Plate for Equal-i-zer Weight Distribution Systems

(8)

$33.39

Equal-i-zer 1/2" Stud Bolt for Weight Distribution Sway Control Bracket - Qty 1

(1)

$5.02

Equal-i-zer 1/2" Stud Nut for Weight Distribution Sway Control Bracket - Qty 1

(6)

$4.15

Question:

Hello, Currently I am using Outer Link Plate for Fastway e2 Sway-Control Bracket Item # FA93-02-5350. I have been using this since 2017 and I have already gone through six of these. My question, will Outside Link Plate for Equal-i-zer Weight Distribution Systems Item # EQ90-02-5370 be a good replacement for that? If so, what bolts will I need? Thank you for any assistance.

asked by: John W

Helpful Expert Reply:

Yes, the Replacement Outside Link Plate for Equal-i-zer Weight Distribution Systems # EQ90-02-5370 will work as a replacement for your Fastway e2 WDS.

As for the proper hardware you're going to need (2) 1/2-13 x 1-1/2" Grade 5 stud bolts # EQ90-04-9281, and (2) 1/2" # EQ90-04-9286 locknuts.

expert reply by: Bryce D