Replacement Brake Assemblies for a Lippert 4,400 lbs Axle
Updated 11/03/2025 | Published 01/25/2025
Products Featured in This Question
Question:
Needing brakes for my Lippert 4400LB axle. The brake assembly is labeled Axeltek-44-gg which brings me to part AKEBRK-35L-SA which is for a 3500lb axle. Its my understanding that the 3500 and 4400lb axles have different bolt hole patterns. Just needing to know what exactly I need for my axles.
asked by: Mark
Expert Reply:
Hey Mark! To replace the brakes on your Lippert 4,400 lbs axles you'll need the Lippert Electric Trailer Brakes item # LC66WD. While the 4 bolt mounting pattern is the same you don't want to put 3,500 lbs capacity brake assemblies on a 4,400 lbs axle. These are sold as a pair. You'll need one set per axle.
We do offer replacement mounting hardware with item # BRKH10B if you want to swap your old ones out while you've got the brake assemblies off. This is hardware for one axle.
Feel free to comment below if you have any additional questions or concerns.
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Search Results: trailer brakes
- Shop: Lippert Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K Lippert Axles
- Shop: Brake Controller
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Search Results: akihub
- Search Results: brake drum
- Shop: Trailer Hitch
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Mounting Hardware for 10" Brake Assemblies
- Search Results: torklift f2032
- Search Results: torklift f3008
- Search Results: 10" drum
- Shop: Lippert Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs
- Q&A: Replacement Brake Assemblies For Lippert 4,400LB Axle
- Shop: Draw-Tite Activator IV Trailer Brake Controller - Up to 4 Axles - Time Delayed
- Search Results: lift blocks
- Shop: Replacement Quick Disconnect Shower Valve for Empire Faucets Exterior RV Showers - White
- Q&A: Replacement Hub/Drum And Brakes For a 2018 CrossRoads Cruiser Aire 28RD With Lippert 4.4K Axles
- Q&A: Will Lippert 4,400 lb Axle Brake Assemblies Fit 3,500 lb Trailer Axle
- Video: Lippert Electric Trailer Brakes Feature Review
- Video: Ultimate Overview of the Replacement Cync Latch for Leer Tonneau Covers
- Q&A: Wire Size Butt Connectors is Needed to Connect Wiring for Electric Trailer Brakes
- Q&A: What Is The Mounting Bolt Spread For The Lippert Electric Trailer Brake Kit # LC66WD?
- Shop: Camper Tie-Downs
- Shop: Mud Flaps
- Q&A: Replacement Hub and Drum Assembly for Lippert 4,400 lb Axle
- Video: Review of SnapPad RV Jack Pads - XTRA Square 6 Jack Pads Level Up Leveling Jacks - SN99FR
- Q&A: What is Brake Mounting Bolt Pattern of Lippert Electric Trailer Brakes # LC66WD
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Adding Electric Over Hydraulic Disc Brakes
Jerred H.
11/3/2025
Hey Mark, how did the Lippert electric brakes work out on your 4,400 lb axles? It’d be great to know if the fit and performance matched what you needed. Your update could make it easier for others with the same axle setup.