Will the Tow Ready T-1 Connector Work on a 2008 Toyota Tacoma X-Runner With LED Tail Lights
Updated 11/09/2009 | Published 11/07/2009
Question:
The first t-one unit the installer he was working with Draw-Tite tried made my ABS system fault when brakes were applied, with LED tailight units installed on the truck. Next installed a powered converter unit that worked properly when installed. A year later when I went to use the trailer for the first time, the module had shorted out or something. The brake lights stay on all the time, even with the truck shut off and no lights on. The unit on the truck now is a Tow Ready Modulite Protector #17499-204. It has the power wire running up to the battery. Cant locate that unit on your site or Draw-Tites site. Dont really want to install that unit again since it crapped out before I even pulled the trailer. Any suggestions as to what will actually work and last some time on the X-Runner? Will part # 30127 work with LED tailight units installed on the truck?
asked by: Phillip R
Expert Reply:
The problems you have experienced tend to indicate a wiring problem on the trailer itself. Since the current converter you have is shorted out, you should begin by troubleshooting your trailer wiring before installing a new converter. Failure to do so could result in shorting out your new converter.
Start at the trailer connector, make sure it is not damaged or corroded. Trace each circuit back to its fixture, looking for pinched or broken wires. Check the wiring insulation for worn spots or cracks that would allow the copper conductor to short out on the trailer frame or other metal.
As far as the trailer wiring harness on your Tacoma is concerned, I would go with the ZCI Circuit Protected, # 119250KIT. This is my go-to harness for vehicles that have compatibility issues. It is compatible with LED taillights and has higher amperage ratings than most other wiring harnesses. You may also need a circuit tester like part # PTW2993 when completing the installation.
I have provided a link to the install instructions for the Modulite.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Q&A: Recommended Trailer Hitch And Wiring To Tow A Trailer With A 2022 VW Atlas
- Search Results: modulite
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: How to Choose a Trailer Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Search Results: trailer wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Shop: Suspension Enhancement
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure for Trailer Hitch Drop
- Search Results: brake controller
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: trailer jack
- Shop: Gooseneck Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional
on Custom Fit Vehicle Wiring
