Does BrakeRite Electric Brake Acutator Require a Adapter For Factory Brake Controller 2019 Silverado

Question

Question:

is this actuator compatible with 2019 Silverado integrated brake controller?

asked by: Craig S

0

Expert Reply:

You will need to use the Adapter Module # DX35FR with the Dexter BrakeRite Electric Over Hydraulic Actuator # DX82KR. This is required with your 2019 Chevrolet Silverado having a factory integrated brake controller.

expert reply by: Bud M

0

Answer 1

From what we know the newer GM trucks, like your 2022 GMC Sierra 3500, shouldn't need the Adapter Module #DX35FR to work with the Dexter BrakeRite system, but I would be lying if I said this kind of thing hasn't popped up in the past. Where…

view full answer...

Answer 2

The integrated brake controller of your 2022 GMC Sierra 3500 has a hydraulic mode which would allow it to work with electric over hydraulic actuators without needing an adapter. With that said if for some reason the controller wasn't recognizing…

view full answer...

Answer 3

You are correct, this is actually a fairly common occurrence and a known issue for the newer Ford trucks and their factory TBC not working with Dexter EOH brakes. Ford did have a recall for almost 400,000 trucks with this issue and they discovered it…

view full answer...

Answer 4

To remove the caps on the reservoir for the Titan BrakeRite EHB Electric-Hydraulic Actuator for Disc Brakes #T4813102 you will simply turn them counter-clockwise as depicted in the attached picture. Keep in mind that only DOT 3 brake fluid should be…

view full answer...

Answer 5

Your understanding of how the air in the bags will operate is correct. If both bags are on one valve the air will shift from one to the other while turning with a heavy load. However, if the load is distributed evenly it will also return to even once…

view full answer...

Answer 6

Sounds like your brake controller will apply your trailer brakes if you apply the manual override lever but not when you press the brake pedal. This is a fairly common problem and the solution is the red wire of the brake controller. Make sure it is…

view full answer...

Answer 7

It is not uncommon for certain factory brake controllers to have issues with electric over hydraulic brakes. This would be the first we have heard of this issue with a 2023 Ford F-350, but it is possible that the brake controller in your ford is…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Does BrakeRite Electric Brake Acutator Require a Adapter For Factory Brake Controller 2019 Silverado

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching