Replacement Motor for Coach Step 725-0022

Question

Question:

I have coach steps 2 step 725-0022 I would like to know what motor fits it as well as the control box it has SN 1667910 on it

asked by: Cheryl

0

Expert Reply:

The correct replacement motor for the Coach steps 725-0022 is the part # LC301695. The correct module would then be the part # LC301702.

expert reply by: Jameson C

0

Answer 1

I do have an option for you but we don't offer any direct right angle fittings that will attach to the Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes part #K71-651. That said, we do have the Kodiak Hydraulic Brake Hose…

view full answer...

Answer 2

The manufacturer no longer makes Coach Steps so you were correct in picking the Kwikee Electric RV Step product #LC3658373 because Kwikee is the correct replacement brand. The manufacturer stated that this product should directly bolt on just like…

view full answer...

Answer 3

Hey Marty, If the Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi #K71-651 has power and and you can hear it pushing fluid when the brake controller is activated then you have a leak or the brake pads are so worn…

view full answer...

Answer 4

Hey Elvin, thanks for reaching out! At this point in time (May of 2025) Furrion doesn't have a heat strip option for their Chill Cube line of AC units. What I recommend doing is using one of the newer R32 Furrion Chill HE AC Units so you can use…

view full answer...

Answer 5

To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the trailer…

view full answer...

Answer 6

For a replacement motor on the Lippert Coach Steps for your Winnebago, you will need the Replacement Motor #LC301695. It will install underneath the base of your step with 3 bolts. The motor features a weatherproof plug and jacketing that goes over…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 10

Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…

view full answer...

Answer 11

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 12

Hey Dale, both DeeMax and Hydrastar make really nice disc brake components. Either kit is going to work really well for your 2022 Grand Design Reflection 337RLS. If you want the best of the best and don't mind paying for the premium brand then go…

view full answer...

Replacement Motor for Coach Step 725-0022

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching