Which Hub Assembly And Bearings Fit A 2002 Coleman Fleetwood Tacoma PopUp Camper?
Updated 06/06/2023 | Published 06/04/2023 >
Question:
Hi, Really need your guys help. I have a 2002 Coleman fleetwood Tacoma pop up trailer and I need to change out the hub and bearings. It appears this is the right product. Could you confirm? Thank you! See below Trailer Hub and Drum Assembly - 3,500-Ib Axles - 10 Diameter - 5 on 4-1/2 - Pre-Greased
asked by: Mike P
Expert Reply:
Hey there, I can certainly help you find some hubs and bearings for your 2002 Coleman Fleetwood pop up camper!
It does look like your camper should have a 3500lb axle with brakes, so you would likely need the setup you were looking at - Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter # AKHD-545-35-K.
To verify compatibility, you can pull of your wheel and then pull the hub assembly off and check the bearing numbers that slide off the spindle. If the outer (first) bearing reads "L68149" or measures 1.378" inner diameter and the outer bearing reads "L44649" or measures 1.063" inner diameter, then this kit is exactly what you need. It includes all the necessary bearings, seals, and races.
You will also want to verify that you have a 10" brake assembly and a 5 on 4-1/2" lug pattern. I attached a link below to help with this.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Q&A: Recommended 7-Way Wiring Components for 2002 Coleman Pop-Up Camper
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: trailer wiring
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Brake Controller
- Search Results: trailer jack
- Shop: Base Plate for Tow Bar
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Search Results: trailer leaf springs
- Search Results: trailer brakes
- Shop: Fifth Wheel Hitch
- Search Results: trailer hubs and drums
- Shop: Vehicle Tow Bar Brake System
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Do I Need to Grease the Spindle Before Installing a New Hub/Drum Assembly?



