Is There a Nut to Install the Timbren Suspension Enhancement System On a 2007 Dodge Grand Caravan

Question

Question:

What is the timbren rear enhancement mounts bolting into. I see them attached to the frame but are there threaded nuts already in the car? This is for 2007 Grand caravan.

asked by: Lawrence K

0

Expert Reply:

The Timbren Rear Suspension Enhancement System part # TDVR05096 which is a fit for a 2007 Dodge Grand Caravan installs with a weld nut inside the frame. I have attached a screen shot of the instructions which explains this below.

expert reply by: Conner L

0

Is There a Nut to Install the Timbren Suspension Enhancement System On a 2007 Dodge Grand Caravan
(click to enlarge)

Answer 1

I did some checking and your 2007 Dodge Grand Caravan has a towing capacity of 3,700 lbs so you'd be within capacity to tow a 3,200 lb trailer. For a hitch you'd want the part #75305 for if you have the stow n go rear seats or part #75119 for…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 8

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 9

Hey Brad, thanks for reaching out. The factory brake controllers they put in the 2015 GMC trucks are largely incompatible with EOH brakes. That is one of the specific model years we see a lot of issues with since they don't have an EOH mode.…

view full answer...

Answer 10

Hey George, congrats on the new truck! You are definitely going to need to support the axle when lifting your Silverado with the Pacbrake Alpha HD Pro Air Bag Suspension Kit item #PB25RV. Lifting your truck by the frame will stretch the bags too far…

view full answer...

Is There a Nut to Install the Timbren Suspension Enhancement System On a 2007 Dodge Grand Caravan

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching