Trailer Wiring Harness Recommendation for 2023 Kia Sorento Hybrid Plug In

Question

Question:

Will this work for a 2023 Kia Sorento Plug in Hybrid? Part # C99DR is the only item that someone has asked about this specific model year and car and the answer was yes so I want to confirm this one will work as well for the PHEV. The car is NOT pre-wired.

asked by: Ben

0

Expert Reply:

I have a trailer wiring harness that has been confirmed as a fit for your 2023 Kia Sorento plug in hybrid but the Curt you mentioned has not been confirmed yet. Instead you'd want the Tekonsha kit part # TK26FR which we know fits and will work great.

expert reply by: Jameson C

0

Answer 1

Yes, we do have a 4-way wiring harness for your 2023 Kia Sorento. I recommend the Tekonsha T-One Vehicle Wiring Harness item #118269. This custom fit wiring harness plugs into your Sorento's factory tow package behind your driver's side rear…

view full answer...

Answer 2

Yes our hitch and wiring kits that fit the 2023 Kia Sorento also fit the hybrid models like the etrailer hitch part #e28AR and the wiring kit part #TK26FR. We have found that the etrailer hitches are generally the highest quality and the Tekonsha…

view full answer...

Answer 3

Hi Mike; I'm assuming by electric you mean you have the 2024 Kia Sorento Hybrid. Are the taillights LED? The #C63RV you got doesn't have a restriction on the hybrid models but is designed for incandescent lights so that is likely the issue.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Trailer Wiring Harness Recommendation for 2023 Kia Sorento Hybrid Plug In

Continue Researching