Can Progressive Dynamics PD4560CSV Replace PD4560K12L Converter

Question

Question:

I have a Progressive Dynamics Converter on my RV model # PD4560k 12l, will a Progressive Dynamics Model PD4560CSV replace it?

asked by: Randel S

1

Helpful Expert Reply:

Yes, the Progressive Dynamics REL 60A 4500 Series Inteli-Power Converter Section # PD4560CSV is the correct replacement for your PD4560K12L.

expert reply by: Robin H

1

Answer 1

Yes, the P3 Brake Controller part #90195 that you referenced has an electric over hydraulic mode so it would work well with the Dexter EOH Actuator part #K71-650 that you also referenced.

view full answer...

Answer 2

The converter is just one more appliance that's built into your RV's power center so there is the chance that it could be damaged or that it may still properly function. The converter is just a charger for your RV's battery and has its…

view full answer...

Answer 3

Hello Mike, I am curious on what kind of batteries you are trying to charge, if they are Lithium batteries that would explain why it is not working. If you have lead-acid batteries (flooded or AGM) I would just swap out the converter section with the…

view full answer...

Answer 4

Yes, we do. To replace your PD4560K12L converter you will need the Progressive Dynamics REL 60A 4500 Series Inteli-Power Converter Section item #PD4560CSV you were looking at.

view full answer...

Answer 5

Hey Justin! With the current Progressive Dynamics REL 60A 4500 Series Inteli-Power Converter Section #PD4560CSV you'll either need to make a jumper or you'll just need to go with the Converter Section #PD4560LICSV instead, so your power…

view full answer...

Answer 6

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 7

The Progressive Dynamics #PD94FR does indeed have an internal transfer switch, but because of this will require you to have a second hot bus bar for the circuits you want to power with the inverter. If your panel only has one bus bar then you'll…

view full answer...

Answer 8

The 125255UC seal has a 1.249" ID and a 1.983" OD and for that our part #34823 will be the correct replacement.

view full answer...

Answer 9

I spoke with Progressive Dynamics and they said it is most likely one of 3 things that has happened. First and foremost will be a bad ground somewhere. A bad ground can cause any number of weird things to happen and this definitely qualifies. You…

view full answer...

Answer 10

I believe what you're referring to is the converter section, as that's what is at the bottom of the power center, like what we see with part #PD4560K18LS8. To replace the converter section you just need part #PD4060CSV which is rated for 60…

view full answer...

Answer 11

Hey Tim, thanks for reaching out! If you're replacing a GE AC unit, then the GE Appliances Deluxe Plus RV AC #GE64FR will work with your thermostat, but if you're replacing a different brand of AC with this GE, then we'll need to get you…

view full answer...

Answer 12

Hey Mark, the oscillating vent of the Furrion Chill Cube #FR27TD points to the front. Is there anyway you could use it pointing forward?

view full answer...

Can Progressive Dynamics PD4560CSV Replace PD4560K12L Converter

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching