What Diameter Holes are Required For The LED Trailer Mini Clearance Lights MCL10AKB & MCL11RKB?
Updated 05/08/2023 | Published 05/05/2023
Products Featured in This Question
Question:
What should the diameter be of the mounting hole for this Lens Item # MCL10AKB? Also please confirm that the mounting hole diameter is 11/16 for the Lens Item # MCL11RKB as stated on the add video.
asked by: Karl O
1
Helpful Expert Reply:
Both the LED Trailer Mini Clearance # MCL10AKB and Uni-Lite LED Clearance # MCL11RKB will require an 11/16" hole for mounting. These both use the same Grommet # A11GB.
expert reply by:
Bud M
1
Product Page this Question was Asked From
Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Red Lens
- Trailer Lights
- Clearance Lights
- Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 3/4 Inch Diameter
- Red
- Optronics
more information >
Continue Researching
- Search Results: 235 85 16 trailer tire
- Search Results: trailer tires and wheels
- Shop: Aluminum Viking Series Valhalla Trailer Wheel - 16" x 6" - 6 on 5-1/2 - Black Spoke
- Q&A: What Size Hole do I Need to Drill to Install the TecNiq Mini Side Marker Light - Amber - 3/4"?
- Shop: Goodyear Duratrac LT225/75R16 Trailer Tire with Eagle Aluminum Wheel - 6 on 5-1/2
- Shop: Aluminum Viking Series Valhalla Trailer Wheel - 16" x 6" - 8 on 6-1/2 - Black Spoke
- Shop: Aluminum Siberian Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - Gunmetal Gray
- Shop: Aluminum AM03 Series Matte Black Machined Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Adapter to Connect a Round 7-Way Trailer Connector on a Semi to a Gooseneck Trailer with a 7-Blade
- Shop: Karrier ST235/80R16 Radial Trailer Tire with 16" Aluminum Wheel - 8 on 6-1/2 - Load Range E
- Search Results: rear trailer light bar
- Article: Trailer Wiring Diagrams
- Search Results: bulldog jack repair
- Search Results: bulldog trailer jack
- Video: The Low-Down on the LED Trailer Mini Clearance and Side Marker Light with Grommet
- Video: All About the LED Trailer Mini Clearance and Side Marker Light with Grommet
- Q&A: Can The Mounting Flange for Optronics Uni-Lite Trailer Lights # A11PB Replace A Rubber Grommet
- Q&A: What Size Hole Do I Need To Have For The Optronics LED Mini Clearance Light?
- Video: Hands-On with the Rubber Grommet for 3/4" Round Trailer Lights
- Video: An In-Depth Look at the Rubber Grommet for 3/4" Round Trailer Lights
- Video: An In-Depth Look at the Replacement Flush Mount Rubber Grommet
- Search Results: safety cables
- Search Results: trailer safety chains
- Video: Review of TecNiq Trailer Lights - Vertical License Plate Lamp - TN34TR
- Article: Trailer Lighting Requirements
- Q&A: Choosing The Correct Replacement Boat Trailer Winch Strap For A 24' Cobalt Boat
- Q&A: Replacement Stop/Turn/Taillight With Back Up Lamp for Eagle Boat Trailer
- Video: Ultimate Overview of the Light Guide LED Truck/Trailer Light
- Q&A: Can Warning Light On Fusion LED Hardwired Trailer Light OPT27NR Be Used As A Turn Signal?