What Size Hole Do I Need To Have For The Optronics LED Mini Clearance Light?
Updated 06/05/2021 | Published 06/04/2021
Products Featured in This Question
Question:
What size hoe needs to be drilled to make the install perfect
asked by: Bobby L
0
Expert Reply:
The LED Trailer Mini Clearance and Side Marker Light with Grommet # MCL10RKB is designed to install into a 3/4" hole.
A Replacement Flush Mount Rubber Grommet # A11GB is available and I recommend getting as few of these as the original ones are rubber and will dry out and crack and fall off over time.
expert reply by:
Bud M
0
Product Page this Question was Asked From
LED Trailer Mini Clearance and Side Marker Light with Grommet - Submersible - 1 Diode - Red Lens
- Trailer Lights
- Clearance Lights
- Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 3/4 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: spring seats
- Search Results: trailer jack
- Search Results: gooseneck trailer jack
- Shop: etrailer Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - 2-5/16" Ball - 30K
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Q&A: Bolt Recommendations for a Equalizer for 2 inch Slipper Springs
- Q&A: 12 Inch Long Equalizer For 2 Inch Slipper Springs & 8,000 lb U-Bolts For Tandem Axle Trailer
- Q&A: Comparing Lippert Never-Fail Bushings to the Bronze Bushings and Wet Bolt Option for Tandem Axles
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Video: The Low-Down on the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs
- Shop: Curt Heavy Duty D-Ring Tie-Down Anchor - Weld On - 4-1/4" Wide - 8,833 lbs
- Shop: Trailer Weld-on Stake Pocket - 6 Gauge
- Shop: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Video: Review of TecNiq Trailer Lights - Clearance Lights - TN52TR
- Video: Comprehensive Review: GloLight LED Trailer Tail Light-STL101RKB
- Shop: TecNiq High Visibility Stop Turn Taillight - 4" - Round - Flange Mount
- Shop: TecNiq Tri Bar Heavy Duty ID Bar - 16.5" - Red Lens
- Video: Review of the Replacement Wet Shoulder Bolt
- Video: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs: The Breakdown
- Video: Comprehensive Review: Spring-Eye Bolt with Locknut for Slipper Springs
- Video: In-Depth Review of the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs
- Q&A: Availability of 1 inch Diameter Red LED Clearance Light for Trailer
- Q&A: Can a Side Marker Trailer light be Wired to Come On with the Blinker
- Q&A: Do 2x4s Get Attached Into the Stake Pocket # C83072