Where to Mount Tandem Axle Hangers For a 26 Inch Leaf Spring to have 35 Inch Axle Separation?
Published 04/27/2023
Products Featured in This Question
Question:
Im setting up all new suspension on a car hauler and would like to use these to achieve a 35inch axle spacing so I can run 235 85 16 tires. I have tandem dexter 6k axles and was planning on using: E94SR 26inch Springs MR27ZR Equalizers MR46ZR Bolt/Bushing/Shackles Just want to make sure all of these would be compatible and allow for the 35 axle spacing. Can you also provide a diagram of what I will need to set for my hanger spacing? Thank you
asked by: Steven E
Expert Reply:
The MORryde Shock Absorbing Suspension Equalizers # MR27ZR are going to be compatible with the 6-Leaf Double-Eye Spring # e94SR. They will connect with the MORryde Suspension Upgrade Kit # MR46ZR and a Hanger Kit # H248. With the springs being 26" long and an 8" equalizer you will want to spread the hangers 30-1/2" from center to have a 35" axle spacing with no weight on the trailer. This measurement is the separation for the mounting bolt centers of the hangers. If the springs did fully compress it would still give you 33" axle separation which is enough for your Kenda Karrier ST235/85R16 Radial Trailer Tire with 16" Black Mod Wheel # AM32743B being 31-5/8" tall.
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Measure a Trailer Axle
- Search Results: trailer leaf springs
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Q&A: How to Pick Out MORryde Equalizer Kit If Wheelbase is 34 inches
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Search Results: brass bushings
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" - Black
- Q&A: Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
- Shop: Progressive Dynamics 9300 Series RV Converter Charger - 12V - 80A
- Search Results: suspension enhancement
- Search Results: lock nuts
- Search Results: dexter trailer suspension parts
- Search Results: morryde trailer suspension parts
- Search Results: trailer suspension parts
- Q&A: How To Confirm Fit of MORryde CRE Shock Absorbing Suspension Equalizers for Tandem Axle Trailers
- Q&A: Picking Longer Shackle Kit for Use with MORryde CRE3000 Equalizer Kit
- Q&A: Recommended Equalizers for a 2002 Montana 3295RK w/ a 35 Inch Wheelbase
- Q&A: Should MORryde Equalizer Kit MR87ZR Or MR27ZR Be Used With 35" Axle Spacing?
- Q&A: 2021 Grand Design 5th Wheel Still Chucking After Replacing Pin Box & 5th Wheel On 2019 Ford F250