Search: dexter trailer suspension parts   >  

Hi Brian, To ensure you're getting the correct fit you'll want to measure the spacing horizontally from eyelet to eyelet and vertically from the hanger bolt eyelet down to the center of the shackle strap eyelets on your current…

Assuming you mean you have a 35" wheelbase when you say you have a 35" axle center then yes, the MORryde Premium Rubber Suspension Kit for Tandem Axle Trailer - 35" Wheelbase - 5.2K to 7K #MR47ZR will be compatible with your 2018 Grand…

Hello Mark. Based on what I could find online, the Dexter 072-042-00 is a standard 1-3/4 inch wide double eye spring which is 25-1/4 inches long and rated for 1,750 lbs. To replace these, I recommend you use the 3-Leaf Double-Eye Spring #e57SR. This…

Dexter 7k axle hubs have a diameter of 2.72 inches where the cap installs which means you'd actually want the part #K7CAP Randy.

The correct replacement for a Dexter 13-10 Equalizer is the Triangular Equalizer part #TREQ310, not the Curved Equalizer part #TREQE1. If you want to upgrade, the Equa-Flex Cushioned Equalizers part #LC279688 would work but you might want to go with…

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

Yes the 4,000-lb leaf spring is compatible with a 3,500-lb axle. There are a couple of important measurements. Spacing from eye to eye on the spring when unloaded with no weight on the axle. Inner eye diameter of the spring roll Spring width from…

The upgraded equalizer kit I recommend for you is the E-Z Flex Heavy Duty Rubber Suspension System part #K71-652-00 which will be an exact fit for the 5-3/4" long equalizers that you have now. The E-Z Flex Heavy Duty Rubber Suspension System are…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The SeeLevel systems will require you to replace your current monitor in order to properly read the sensors and operate. There are quite a few different combinations of monitors and sensor strips so I'd like to know exactly what you're…

It is normal for the rubber to push out of your MORryde Shock Absorbing Suspension Equalizers #MR27ZR the way it is. The main issue I see is your Shackle Strap #TRSL313 is wearing out. I can see a bit of the hole on the top left strap which means the…

I do have an upgrade option for your 6-1/16" long, 4" tall Equalizer #TREQ310, and since you don't want to lower the ride height with the E-Z Flex #K71-652-00, I recommend going with an option from MORryde, as the Equa-Flex are just too…