Could Different Length RoadArmor Replace MORryde CRE3000
Updated 02/27/2025 | Published 02/17/2025
Question:
My Montana came with the CRE3000 with 2/14inch shackles. Is it possible to move from the CRE3000, with an eye width of 8inch to a Road Armor TrailAir with a 6inch eye width? Thanks, Jeff
asked by: Jeff
0
Expert Reply:
Not without going to a different length leaf spring as well to make up for that different length. You'd basically need to go with a leaf spring that is around 1 inch longer than what you have. Do you not like the CRE3000?
expert reply by:
Jameson C
0
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White
- Search Results: cre3000
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Q&A: Can Fastway e2 Weight Distribution be Upgraded from 600 lb Spring Bars to 800 lb or 1,000 lb Bars
- Q&A: Can 1,000 lb Fastway e2 Bars be Used with Head Unit for 800 lb System
- Search Results: st205/75r15
- Search Results: tires
- Search Results: fantastic fan
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White
- Shop: MaxxAir Standard Roof Vent Cover - 20" x 19" x 9-1/2" - Translucent White
- Shop: Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems -Qty 2 - 1,000 lbs TW
- Article: How to Measure a Trailer Axle
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Q&A: Recommended Cushioned Equalizer Replacement Options For Factory Equalizer 6" Wide and 4" Tall
- Q&A: Replacement Equalizer, Shackles and Shock Kit For a 2022 Nash 23D Travel Trailer
- Search Results: trailer leaf springs
- Search Results: morryde alltrek 4000
- Search Results: rv vent cover
- Q&A: How to Pick Out MORryde Equalizer Kit If Wheelbase is 34 inches
- Q&A: Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
- Article: How to Accurately Measure Trailer Leaf Springs
Jeff
2/27/2025
Thanks, Jameson, I am not dissatisfied with the CRE3000's. I was doing regular maintenance, including replacing some bronze bushings, and thought that while I was at it that I would replace the equalizers since they were several years old...so why not try the TrailAir's. Since then I have learned that as long as the rubber in the CRE3000's is intact that they are not compromised. The rubber in mine still looks great so there's no need to replace them. I have now finished lubing and reassembling the suspension components and am confident in keeping the CRE3000's in place. I appreciate you getting back. I couldn't find any real answer to my original question so having more online info regarding the importance of the dimensions of these products can be helpful to others.