Will the Lippert Tandem Axle Equa-Flex AP Kit Work w/ the Road Armor Shock Absorbing Equalizer Kit?

Question

Question:

Will this kit work with Lippert Road Armor?

asked by: Tommy J

0

Expert Reply:

Yes, the Lippert Tandem Axle Equa-Flex AP Kit item # LC64FR will work with the Road Armor Shock Absorbing Equalizer Kit item # LC696740.

expert reply by: Jerred H

0

Answer 1

The Triangular Equalizer #TREQ310 is a replacement for the Dexter 13-10 on your 2022 Nash 23D travel trailer. You should consider upgrading to the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR. These will pair with either the 2-1/4"…

view full answer...

Answer 2

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

view full answer...

Answer 3

I could not find any reference to part 435251, though we can help you find the correct replacement for the Equa-Flex on your Grand Design Reflection. To find the right one you need to measure your equalizer from center hole to center hole…

view full answer...

Answer 4

The Lippert Road Armor part #LC696740 that you referenced is most likely the correct kit you'd need but you'd want to measure the distance between the holes of your current equalizers. If they are 6 inches than this kit would fit. This is a…

view full answer...

Answer 5

I wasn't able to find any specific information on your 2015 AML Auto Hauler open trailer with tandem 5,200 lbs axles current suspensions. There isn't a database I can look at and tell you exactly what part number you will need. The Lippert…

view full answer...

Answer 6

The best route to go would be to choose the system whose dimensions most closely match the existing equalizer you have. Changing the equalizer size would mean you'll need to change the length of the shackle links used, or you'll throw off the…

view full answer...

Answer 7

Lippert has been transitioning from the old school yellow paint to the new blue pain on the Road Armor Equalizers #LC696740 so you'll be getting blue. With that said color doesn't matter, and instead you need to worry about using the right…

view full answer...

Answer 8

Thanks so much for that info, and to replace your current leaf springs that are 24 inches apart from center eye to center eye, you want springs that are slightly shorter because over time they flatten out. So for replacements I recommend 23-1/8"…

view full answer...

Answer 9

The Road Armor Shock Absorbing Equalizer Kit #LC696740 that you referenced is close enough dimensionally to the Equa-Flex equalizer #LC279687 that you have now so it will fit and work well. Bushing come with this already pre installed, for bolts…

view full answer...

Answer 10

Hi Mike, With the height of your equalizer increasing an inch you might need to switch to 3-1/8" shackle straps #TRSL313 to keep the leaf spring stack level but this isn't an exact science so your leaf springs could end up sitting too close…

view full answer...

Answer 11

It is okay to mix and match the Lippert Road Armor #LC696740 with the MORryde 2-1/4" #MR46ZR or 3-1/8" #MR76ZR shackle straps. The MORryde shackles are superior in construction to the Lippert kits we currently carry. MORryde did just…

view full answer...

Answer 12

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…

view full answer...

Will the Lippert Tandem Axle Equa-Flex AP Kit Work w/ the Road Armor Shock Absorbing Equalizer Kit?

Product Page this Question was Asked From

Continue Researching