Parts Needed to Install a 7-way on a 2011 Damon Daybreak Motorhome

Updated 04/17/2023 | Published 04/15/2023

Products Featured in This Question

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3395)

$121.25

10 Gauge Wire - Blue Primary - Per Foot

(104)

$1.89

Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot

(323)

$3.60

Question:

I have a 2011 Damon daybreak motorhome and want to install a 7 pin trailer plug. Do you have an adapter to connect to the factory harness?

asked by: Brian R

Expert Reply:

Since it sounds like you already have a factory 4-way on your 2011 Damon Daybreak, you would need the Universal Installation Kit for Trailer Brake Controller # ETBC7 to adapt that 4-way into a 4-way and 7-way. Given the length of your vehicle you will also likely need additional wire length. The # ETBC7 comes with 25'. If you are installing a brake controller you can use the Deka Jacketed 2 Wire # 10-2-1, if you are just wiring it for the 7-way with no brake controller you can use the 10 Gauge Primary Wire # 10-1-1. Each option is sold by-the-foot, so you just need to enter the length you need in the quantity box.

expert reply by: Scott S