Lug Nuts and Torque Spec for Karrier ST205/75R14 Radial Trailer Tire with 14" White Wheel

Question

Question:

I have questions on AM32153 tire and rim. does the rim have a 60 degree cone for the lug nut? would the CE11051 lug nut be used with the rim? what is the recommended torque for the lug nut? thanks for you help

asked by: Mark K

1

Helpful Expert Reply:

Yes, the # AM32153 has a 60 degree cone and you can use the # CE11051. The recommended torque spec is 75 - 85 ft. lbs.

expert reply by: Robin H

1

Answer 1

The 14" aluminum wheel used for the Westlake ST205/75R14 Radial Tire w 14" Condor Aluminum Wheel - 5 on 4-1/2 - LR D - Gunmetal #LH37VR is compatible with 1/2"-20 lug nuts like #LHLR103. For this stud size you will want to torque the…

view full answer...

Answer 2

The Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Spoke Wheel - 5 on 4-1/2 - Load Range D #AM32161 is my recommendation for a radial tire and Loadstar ST205/75D14 Bias Trailer Tire with 14" White Wheel - 5 on 4-1/2 - Load Range C…

view full answer...

Answer 3

The hub center's outer diameter of the Dexter Hub and Drum #84546UC3 measures 2.59 inches. A rim with a 3.19 pilot diameter, like #AM20352 will fit onto the Dexter hub because the wheel is lug-centric and not hub-centric.

view full answer...

Answer 4

I have attached a chart that has the torque settings for lug nuts. The torque settings are based on the lug size, type, wheel size, and material. The 6 marks you have on the lug means it is a grade 8 high strength lug bolt. For example, for a 15-inch…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Lug Nuts and Torque Spec for Karrier ST205/75R14 Radial Trailer Tire with 14" White Wheel

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching