Alternative 17-1/2" Wheel for Aluminum Bearcat in Gunmetal Gray

Question

Question:

Do you have the following in a 17.5 rim? Aluminum Bearcat Trailer Wheel - 16 x 6 Rim - 8 on 6-1/2 - Gunmetal Gray Item # 274-000039

asked by: David J

0

Expert Reply:

For your application I recommend an alternative with the 17-1/2" Black Aluminum Lynx Trailer Wheel # 274-000006.

Unfortunately, the Bearcat in Gunmetal Gray you're looking for is something we used to carry but it was marked as no longer available and so we don't carry it any longer and you'll likely be hard-pressed to find it elsewhere.

expert reply by: Jon G

0

Answer 1

Lionshead does not offer us a version of the Bearcat trailer wheel part #274-000039 that comes with any tires mounted on it so if you wanted a Load Range E tire for it, you'd need to order it separately like with the Goodyear Endurance part…

view full answer...

Answer 2

Here is the information I was able to find on your Stabilus 654150 0550N 275/12 A 15 gas strut which you can verify with yours. The Stabilus strut measures 26.496" when extended and 14.921 when retracted at the center of the mounting holes with…

view full answer...

Answer 3

The Aluminum Bearcat Trailer Wheel #274-000039 is rated for tire pressures up to 110 psi. You will need to replace the valve stem on this wheel with a higher rated one, as the existing valve stem is not rated for 110 psi tire pressure. If you need…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Alternative 17-1/2" Wheel for Aluminum Bearcat in Gunmetal Gray

Featured Help Information

Miscellaneous Media

Continue Researching