Recommended Hub and Brake Assemblies for Dexter 9k Axles w/ Oil Bath
Published 04/06/2023
Products Featured in This Question
Question:
I have a 1981 Hudson trailer and I am trying to find Dexter axle Trailer parts. I can send pictures if needed. I needed drums, seals, bearings and brake assembly. 9k axles - oil bath bearing. Lug nut bolt patter 8x6.5 Drum # 8-232 Backing plate 12.25 x 3.38 Dual wheels I found part #k08-288-90 drum assembly to look identical. Thank you
asked by: Odell L
Expert Reply:
Since your trailer was made in 1981 you will need the Dexter Trailer Hub and Drum Assembly item # K08-288-90 you were looking at. This trailer hub is designed for axles made before July of 2009 so unless you have replaced your axle in the last 15 years this is what you want. These are sold individually. You will need two per axle.
For a set of brakes you will want the Electric Trailer Brake Kit w/ Dust Shields item # AKEBRK-10. These self adjusting electric brakes are rated for 9,000 lbs and 10,000 lbs axles. You will need one set per axle.
If you would like to replace your mounting bolts you will want the Mounting Bolts and Hardware for 12-1/4" Brake Assemblies item # BRKH122510. This will replace one axle's brake mounting bolts and hardware.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles - 8 on 6-1/2 - Oil Bath - Before July 2009
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 387A / 25580
- Standard Grade
- For 9000 lbs Axles
- For 10000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Shop: Magnet Retainer Clip for Oval Magnet
- Q&A: Oil Bath Hub Installation and Operation for 8,000 lbs Dual Axles
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 48-1/2" Axle Spacing
- Shop: Dexter Tandem-Axle Trailer Equalizer Kit for 2-1/2" Slipper Springs - 24-5/8" Equalizers
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 48-1/2" Axle Spacing
- Shop: Replacement Trailer Wheel Bearing - 14125A - Qty 1
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 38" Axle Spacing
- Video: Feature Review Two Piece Nylon Bushing
- Video: What to Know About the Kodiak Disc Brakes
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Shop: Brake Controller
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Measure for Trailer Hitch Drop
- Shop: Gooseneck Hitch
on Trailer Hubs and Drums
