Feature Review Two Piece Nylon Bushing Video

The #LC279688 is the direct replacement for your 145545 Equa-Flex. You do not want to use the Road Armor #LC696740 as a replacement. The Road Armor dimensions are quite different and will likely throw off other suspensions components. You also…

I never recommend using grease with Nylon Bushings #TRBU11566. The grease can trap dirt which will cause the nylon to become damaged easier. And the chemicals in different greases can cause the nylon bushings to break down. If you want to use Grease…

There isn't a way to order the kit part #APT8 with the bolts #126B2 so you'd have to order the wet bolts in addition to the kit and swap them out.

It really just depends on what you are looking to get out of the bushings. Bronze bushings, like part #K71-291-00, will last longer but are more noisy and it is recommended to use wet bolts like part #126B2 to keep them lubricated. Nylon bushings,…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

The picture with the torn up bushing looks like the eye of your slipper spring. Is that correct? If so, it is coming undone and probably the reason you're having this problem. It should be enclosed and not look similar to the hook on the end of…

The load or hitch height would not affect the front spring eye. For it to come unwound or loose its rounded shape there has to be some kind of rearward force pulling it out of round. This would shift the front axle effecting the equalizers and the…

Your drum/hub that is the Dexter 8-147 part number should have an inner bearing #LM48548, an outer bearing #L44649, and a grease seal #58846. If this is the case then we do have some hub/drum assemblies that would work great for your application. The…

The inner bearings should be #LM48548 (1.375 inch inner diameter), outer bearing should be #L44649 (1.06 inch inner diameter) and the grease seal should be #58846. I would recommend you pull your bearings out to verify that but that SHOULD be what…

There isn't a pintle adapter for ball mount #C45902 rated for 21,000 pounds but I may have a solution for you. What you could do is use ball mount plate #337PM25812 with Convert-A-Ball pintle hook combo #PH1. When used as a pintle hitch the…