Replacement Gear Box for Venture Landing Gear VMC940RB

Question

Question:

need a venture gear box VMC940RB-352320

asked by: Monty S

0

Expert Reply:

The correct gear box to replace a Venture VMC940RB is the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602.

expert reply by: Jameson C

0

Answer 1

Hello Emon, thanks for reaching out. No, the Furrion Chill Cube AC Units like part #LC54DX do not have a soft start installed. These units start up in different stages, so you do not get big amperage spikes during startup like you do with other…

view full answer...

Answer 2

We do not have any wheel studs that match what you are needing exactly. The closest that we have are the Replacement Trailer Hub Wheel Stud #RG03-080 that you have already discovered.

view full answer...

Answer 3

Hey David, thanks for reaching out! A new motor like the Tuson High Speed 5th Wheel RV Landing Gear Motor #TUS57FR could definitely improve the performance of your landing gear, but before replacing the motor I recommend trying to manually operate…

view full answer...

Answer 4

Given the issue you described and the fact that you have done a good job of troubleshooting and checking other potential sources for the issue, it sounds like the motor is going bad. Since you mentioned the landing gear working fine for a little bit…

view full answer...

Answer 5

Hey Michael, so based on what you mentioned it sounds like you have a standard Lippert/Venture/LCI style landing gear and you have the 5,500 RPM motor. We do have a higher RPM motor that you can replace it with with the part #LC141893 which turns…

view full answer...

Answer 6

Though I was unable to find out anything about your current 12534 motor, we may still have a more heavy duty option available for you. The Lippert HD 6,500 lb Motor #LC196308 will fit the standard gearbox that is on most landing gear, like the…

view full answer...

Answer 7

The price difference does seem backwards, but the faster speed part #LG-141893 has the same weight capacity as the lower speed part #LG-142178 that you also referenced. It's a difference of 5,500 RPM and 7,140 RPM so you would definitely see a…

view full answer...

Answer 8

We have the same part number basically twice through two different vendors here that are the exact replacement motor you are looking for. The Lippert part #LC142178 and the Stromberg part #LG-142178. They are the exact same motors and if I were you I…

view full answer...

Answer 9

Hey Greg! We hear that quite often about U-Haul. The Hopkins 47185 is almost identical to our item #HM47180, so if they installed it correctly you should have a blue wire ran into your 2019 Toyota Highlander's cab. If not you'll need to use…

view full answer...

Answer 10

The part number 125340 you referenced is actually a motor, and the correct replacement for that is Replacement Motor #LG-142178. However, since you mentioned gears in the gearbox, you will need to replace the entire thing, which for your landing gear…

view full answer...

Answer 11

In case you want to just service your existing Venture VMC940 5th wheel landing gear driver leg you can use gearbox #LG-179015. For a complete replacement lead jack use Replacement Lead Jack with Drop Leg #LG-179013 which is a universal fit that…

view full answer...

Answer 12

Hey John, thanks for reaching out. The brake shoe lining on a 3,500 lb axle brake assembly should be like 0.18" when brand new. Dexter recommends replacing the shoes when they get down to about 0.0625 or 1/16". Let me know if you need…

view full answer...

Replacement Gear Box for Venture Landing Gear VMC940RB

Product Page this Question was Asked From

Continue Researching