bing tracking image
Q & A Icon

Replacement Motor for a 125340 Motor Model Number 1a065012-02-01  

Updated 10/10/2026 | Published 04/14/2022

Question:

My front landing gear keeps blowing fuses 30 amp. I took the landing gear apart and greased everything. Everything seems to be operating smooth. The motor is a #125340 model 1a065012-02-01. 9 amp. the wiring looks good. do you think the motor is going bad? when i replace the fuse it works for a little bit. Thanks

0

Expert Reply:

Given the issue you described and the fact that you have done a good job of troubleshooting and checking other potential sources for the issue, it sounds like the motor is going bad. Since you mentioned the landing gear working fine for a little bit after replacing the fuse, what is likely happening is that the motor is going bad and overdrawing power which is causing the fuse to eventually blow.

The correct replacement motor for you is the Replacement Motor for Stromberg Carlson Electric Landing Gear # LG-142178. We also have the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015 should you want or need to replace the gear box as well.

expert reply by:
0
Scott S
Kevin profile picture

Kevin

10/10/2026

Can you get a landing gear switch for the same jack?

Claire H. profile picture
Etrailer Expert

Claire H.

10/10/2026

@Kevin The only switch I have for that landing gear system is the Replacement Switch for Stromberg Carlson Electric Landing Gear part # LG-145236. The switch measures 2-1/4" long x 3-1/4" wide and is designed to be used with Stromberg Carlson models LG-1, LG-2, LG-3, and LG-4. It'll also work with Atwood, Lippert, and Venture model landing gears too.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>