Recommended Axle Upgrade For Installing 15" Wheels and Tires On Harbor Freight Trailer
Updated 03/21/2023 | Published 03/20/2023 >
Products Featured in This Question
Question:
Seeking to upgrade 1990s harbor freight trailer with new axle, rims and 5 bolt rims/ 15 tires. What do you recommend?
asked by: George J
Expert Reply:
That's going to depend on the specs of your trailer frame and current axle measurements.
To go with a standard axle you'll need to measure the hub face to hub face measurement, and spring seat to spring seat measurement (shown in diagram below) to find a compatible axle, but I can tell you from experience you'll almost 100% be ordering a custom axle to get one with the capacities/specs you're looking for to fit your trailer as they tend to come with a much smaller 2,000lb axle.
The easiest option would be going with an axle-less setup like the Timbren # A35RS545 if you do not need trailer brakes, or the # A35RS545E if you do need trailer brakes.
This option will bolt directly to your trailer frame and is quite the upgrade over standard leaf spring suspension which is why most of the off-road/overlanding trailers on the market use these.
You'll be able to install any 15" 5 on 4-1/2" bolt pattern wheels of your choice with either option. I went ahead and included a link to our selection of wheels and tires that would work for your to choose from.
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: rubber bushing
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Q&A: Replacing Suspension Hardware For Harbor Freight Single Axle Trailer With Slipper Springs
- Q&A: Recommended Axle and Leaf Springs for a Harbor Freight 4x8 Foot Folding Trailer Model 90154
- Q&A: Can Timbren Heavy-Duty Axle-Less Trailer Suspension Install on Harbor Freight Trailer
- Q&A: Best Parts to Upgrade a Harbor Freight Trailer
- Shop: Rear Hanger for 1-3/4" Slipper Spring
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-1/4" Long
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Shop: Timbren Silent Ride Suspension for Single Axle Trailers w/ 2" Square Axles - 2,000 lbs
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 1,200 lbs
- Shop: Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Shop: Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Search Results: trailer jack
- Search Results: trailer leaf springs
- Shop: Suspension Enhancement
- Search Results: spare tire mount
- Shop: Fifth Wheel Hitch
- Shop: Towing Mirrors
- Search Results: trailer brakes
- Shop: Vehicle Sway Bars
- Search Results: trailer suspension parts
- Article: How to Measure a Trailer Axle
- Q&A: Maximum Speed Rating of a 18x8.50-8 Trailer Tire
- Q&A: Will Air Lift LoadLifter 5000 Air Helper Springs AL38FF Fit 2022 Ford Bronco With Sasquatch Package?
- Q&A: Replacement Hub/Drum and Bearings for 2006 Carmate Trailer With Dexter 8-247 Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle


