Replacement Hub/Drum and Bearings for 2006 Carmate Trailer With Dexter 8-247 Assembly
Updated 04/14/2026 | Published 04/07/2026
Products Featured in This Question
Question:
looking for replacement drum and bearing kit on my 2006 carmate trailer dexter rubber torsion axel 5 on 4/1/2 bolt pattern, 10.09 drum 8-247 the spindle arm number 69-47 , I have pictures
asked by: Victor G
Expert Reply:
Hey Victor! The 8-247 is enough to identify what is on your 2006 Carmate trailer. Those are 3,500 lb axles, so you can replace the hub and drum assembly with the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K. If you prefer the Dexter branding it is the Dexter Trailer Hub & Drum Assembly # 84546UC3-EZ. Both are pre-greased and include the bearings and seals.
What do you usually haul with the Carmate?
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: 1~3/4 inch wide trailer leaf springs
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: 86~1/2 inch hub face trailer axles
- Search Results: axles
- Search Results: trailer axles
- Article: Spring Towing Readiness Checklist
- Video: What to Know About the Trailer Axle with Idler Hubs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: 10 Gauge Wire - Red Primary - Per Foot
- Shop: 18-Gauge 2-Wire Bonded Wire - 40'
- Video: Checking Out the Dexter Trailer Axle Beam w/ Idler Hubs
- Shop: Dexter Boat Trailer Axle - 89" Long - Galvanized
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Brake Controller
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Article: How to Measure for Trailer Hitch Drop
on Trailer Hubs and Drums
Bill
4/14/2026
I went with the Easy Grease trailer hub/drum and they were a perfect fit for my 3,500 lb. dexter axles.