See what our Experts say about this TruRyde Trailer Suspension Parts

• Will Nylon Bushing part # TRBU11561 Work on 1-3/4 inch Wide Leaf Spring
  Hey Clayton, so the part # TRBU11561 is the correct length for you since your spring is 1-3/4 inches wide and we do not have a version of this that is 2 inches wide.
  view full answer...
• Should a Nylon Bushing Be Used With the Open Eye End Of Slipper Spring # e33SR
  A Nylon Bushing # TRBU11561 is not required to be used on the open end of the 4-Leaf Slipper Spring # e33SR. Since the bushing is not going to be fully encased it stands that under the weight of the trailer it will fail and break apart more easily. I recommend spraying some LubeMaster Dry Silicone Spray # RM-747 on the open end bolt and contact areas of the spring. This will provide lubrication to the parts without attracting dirt.
  view full answer...
• Replacement Bushing For Open Eye Slipper Leaf Spring On EZ Loader Trailer
  The Nylon Bushing # TRBU11561 sounds like the bushing that you are needing for the open eye side of your leaf spring. this has a 9/16" inner diameter and the outer diameter is 1.024". This is all nylon with no steel sleeve inside the bushing. If you can let me know the outer diameter of the bushing that is inside the closed eye on your leaf spring I can see what we have for that side.
  view full answer...
• 1992 Escort Single Axle Boat Trailer Bayliner Leaf Spring Bushing Replacement
  The Nylon Bushing # TRBU11561 that you referenced will work great for you. It will give you a single bushing that will match what you have well as it has an inner diameter of 9/16 inch and an outer diameter of 1 inch.
  view full answer...
  
• Correct Bushing and Bolt for 4-Leaf Slipper Spring # e33SR
  The 4-Leaf Slipper Spring # e33SR that you referenced actually comes included with the nylon bushing but if a replacement is needed then the 9/16 inch # TRBU11561 that you mentioned would be the correct size and will work perfectly. The correct bolt for this setup is the Redline Spring-Eye Bolt # 166079 that features a 9/16 inch diameter and 3-1/2 inch length.
  view full answer...
• Availability of Nylon Trailer Leaf Spring Bushings
  We do offer nylon bushings for trailer leaf springs as separate replacement parts. For example, we have part # SP05-080 from Redline, which is a set of four (4) two-piece nylon bushings. These measure 9/16-inch inner diameter, 1-5/16-inch outer diameter and 2-inches in length. Other sizes are also offered and these are linked below. # TRBU12566 # SP05-060 # TRBU11508 # TRBU11561 # TRBU11566 # TRBU11568 # 721590 # TRBU13871 # TRBU11506
  view full answer...
• Replacement Bushing for Leaf Spring with Outer Diameter of 1 inch and Inner Diameter of 9/16 inch
  The closest bushing dimensions we have for your application would be the part # TRBU11561 which has a 9/16 inch inner diameter, 1-3/4 inch in width, and an outer diameter of 1.024 inch.
  view full answer...
• Replacement Leaf Spring Bushing For a EZ Loader Trailer Slipper Spring Outside Diameter 1.02"
  It sounds like you are needing the Nylon Bushing # TRBU11561 for your EZ Loader trailer leaf springs. These bushings have an outside diameter of 1.024" and a inner diameter of 9/16". The bushing is 1-3/4" wide. As long as the inner diameter matches your bolts being used and the springs are 1-3/4" wide this is the correct bushing for you.
  view full answer...
• What Size Bushings Does the Trailer Slipper Spring Part # e33SR Use
  The bushings of the 4-Leaf Spring part # e33SR have a 9/16 hole diameter. If you are looking for a replacement bushing you would want the part # TRBU11561. This bushing has a 9/16 inner diameter and an outer diameter of 1.02 inches.
  view full answer...

Do you have a question about this Trailer Suspension Part?