What is the Length and Diameter of the Emergency Break Away Cable Repair Kit

Question

Question:

Hi, i wanna to know this breakaway cable diameter and effective working length of the cable from the hook to the indicator bead, thanks for your answer..

asked by: Bob

0

Expert Reply:

The Emergency Break Away Cable Repair Kit # DX64XR is the correct option for a Dexter Axle A-60 brake actuator like the # DX56FR.

But, the Emergency Break Away Cable Repair Kit # DX64XR is 17" long with a diameter of 0.1" or 2.64mm.

expert reply by: Scott S

0

Answer 1

Thanks for all the details! To replace the breakaway cable that came on your Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR you just need the Emergency Break Away Cable Repair Kit #DX64XR and you'll be good to go!

view full answer...

Answer 2

When it comes to replacing the Brake Away Cable on The Dexter Brake Actuator #DX29FR The Emergency Break Away Cable Repair Kit for Dexter Axle A-60 Brake Actuators #DX64X is the correct kit for you. . This kit includes the components needed to repair…

view full answer...

Answer 3

We do have the Emergency Break Away Cable Repair Kit #DX64XR for Dexter Axle A-60 Brake Actuators.

view full answer...

Answer 4

This does happen every now and then, but you will need the Dexter Replacement Emergency Breakaway Cable Kit #DX64XR. This is specifically for the A-60 actuators, which the #DX56FR is. With that said, on the bottom or underneath side of the inner…

view full answer...

Answer 5

Hey P.J., we have just what you are looking for with the Emergency Break Away Cable Repair Kit #DX64XR. This will replace all of the components that you damaged when your broke the breakaway kit of your actuator.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

What is the Length and Diameter of the Emergency Break Away Cable Repair Kit

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching