Replacement Breakaway Cable For a Dexter A-60 Surge Brake Actuator

Question

Question:

DOES THE A60 HITCH HAVE A REPLACEMENT BREAK AWAY CABLE OR IS NOT REPLACEABLE

asked by: MIKE

0

Expert Reply:

We do have the Emergency Break Away Cable Repair Kit # DX64XR for Dexter Axle A-60 Brake Actuators.

expert reply by: Bud M

0

Answer 1

We do have the Replacement Inner Member for Dexter DX7.5L Actuators and Disc brakes. You would need to select the Single Axle #DX39FR or Tandem Axle #DX99FR version.

view full answer...

Answer 2

The Replacement Inner Member for Dexter DX7.5L Actuator part #DX99FR is designed for UFP Model A-60 Actuators. I can't look up what actuator any one particular trailer uses but if you can get me the the model number of the existing actuator found…

view full answer...

Answer 3

I did some research on your 2006 Marine Master Tandem Axle Trailer and found some of the UFP part lists. Dexter owns that company as well as the Kodiak line, so the parts are extremely similar with different part numbers that should work very well as…

view full answer...

Answer 4

This does happen every now and then, but you will need the Dexter Replacement Emergency Breakaway Cable Kit #DX64XR. This is specifically for the A-60 actuators, which the #DX56FR is. With that said, on the bottom or underneath side of the inner…

view full answer...

Answer 5

When it comes to replacing the Brake Away Cable on The Dexter Brake Actuator #DX29FR The Emergency Break Away Cable Repair Kit for Dexter Axle A-60 Brake Actuators #DX64X is the correct kit for you. . This kit includes the components needed to repair…

view full answer...

Answer 6

The Emergency Break Away Cable Repair Kit #DX64XR is the correct option for a Dexter Axle A-60 brake actuator like the #DX56FR. But, the Emergency Break Away Cable Repair Kit #DX64XR is 17" long with a diameter of 0.1" or 2.64mm.

view full answer...

Answer 7

Thanks for all the details! To replace the breakaway cable that came on your Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR you just need the Emergency Break Away Cable Repair Kit #DX64XR and you'll be good to go!

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Dwyane yes that is necessary unfortunately. We do have disc brake kits like the DeeMaxx Disc Brake Kit #DE68YR which will work with 7,000 lb axles that uses specific bearings. The last couple of things you'd need is a brake line kit…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

Hey Patrick, those dimensions don't appear to be anywhere from what I can find. While I can't give you that info, I can say that as long as the bearings fit, and you have a #11 or #12 spindle, then the Dexter Trailer Hub and Drum Assembly…

view full answer...

Answer 12

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

view full answer...

Replacement Breakaway Cable For a Dexter A-60 Surge Brake Actuator

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching