Replacement Wheel Tray for Yakima Holdup Evo Bike Rack

Question

Question:

I have single bike tray hitch rack 1 bike capacity someone hit me and the back wheel is gone to hold bike wheel. On your parts does not look like the one I have just wanted to know if it will fit? See picture Accessories and Parts 8880831 or 8002481 Hitch Bike Racks Cradle and Arm Parts Cradle HoldUp Yakima

asked by: Janet O

0

Expert Reply:

Since you have a Yakima Evo HoldUp the correct replacement rear tray would be the part # 8880832.

expert reply by: Jameson C

0

Yakima Holdup Evo
(click to enlarge)

Answer 1

You are correct that the Replacement Wheel Cup for Yakima HoldUp EVO Front Tray #8880831 is for the rear wheel. The front reference is for the front tray as the parts are different between the front and rear trays on the Yakima Hold Up EVO bike…

view full answer...

Answer 2

I may have a solution for you, but the #8880832 isn't going to fit into the end on your Yakima HoldUp with a 2" shank; it may look like you could get it into the end but there's not a hole for a pin to be installed even if it did fit, so…

view full answer...

Answer 3

Hey Mike, We do have replacement keys for your Yakima HoldUp Bike Rack #Y02443. What is the number on your lock cores? It would have been on the face of the keys you received and written down on the instructions once you received the rack. If you can…

view full answer...

Answer 4

Hello Peggy, thanks for reaching out. The only way we can provide the correct key would be if you have the key number. Without that, there is no way of knowing what key will open your lock. If the locks are currently unlocked, you can use the change…

view full answer...

Answer 5

It truly depends on what bike rack you have and what key code you have with the locks. If the key you have doesn't turn the lock, it most likely is not the correct key for the rack. The best way to proceed is to make sure the key you have matches…

view full answer...

Answer 6

I'm sorry to hear that you were hit by a car (hopefully you're ok!) and we do have exactly what you need, though the arm by itself is not something that is available from Yakima as a replacement part. For your Yakima HoldUp 2-Bike Rack…

view full answer...

Answer 7

I did some research and it appears that the numbers you gave go to the Yakima HoldUp Bike Rack for 2 Bikes #Y02443. With that being said, since you're needing to replace a broken arm you are actually going to need to replace the entire wheel…

view full answer...

Answer 8

The Yakima HoldUp 2 Bike Rack for 2" Hitches - Platform Style - Tilting #Y02443 is different from the Yakima HoldUp EVO 2 Bike #Y02479 in a couple ways. The original could hold bikes up to 60 lbs each versus the EVO holding up to 50 lbs per…

view full answer...

Answer 9

The differences between the Yakima HoldUp #Y02443-2 and the HoldUp EVO #Y02479-2 include an integrated SpeedKnob to take out movement of the bike rack, an easier system for tilting the bike rack, and the ability to add fat bike tires (up to 5"…

view full answer...

Answer 10

Sounds like you are needing a replacement wheel strap for your Yakima Holdup. For that we have the part #Y8880229 which I confirmed as a fit with Yakima on your rack.

view full answer...

Answer 11

Yakima does indeed offer a replacement wheel strap. It's part #Y8880229.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Wheel Tray for Yakima Holdup Evo Bike Rack

Products Featured in This Question

Continue Researching