Replacement Wheel Strap Recommendation for Yakima Holdup Bike Rack

Question

Question:

Hi, I have a Yakima Hold up 2 hitch mounted bike rack. One of the plastic zip ties that secures the rear tire broke. Do you sell any replacements for that particual bike rack? Thanks!

asked by: Randy

0

Expert Reply:

Sounds like you are needing a replacement wheel strap for your Yakima Holdup. For that we have the part # Y8880229 which I confirmed as a fit with Yakima on your rack.

expert reply by: Jameson C

0

Answer 1

The differences between the Yakima HoldUp #Y02443-2 and the HoldUp EVO #Y02479-2 include an integrated SpeedKnob to take out movement of the bike rack, an easier system for tilting the bike rack, and the ability to add fat bike tires (up to 5"…

view full answer...

Answer 2

Since you have a Yakima Evo HoldUp the correct replacement rear tray would be the part #8880832.

view full answer...

Answer 3

Yakima does indeed offer a replacement wheel strap. It's part #Y8880229.

view full answer...

Answer 4

The Yakima Fat Tire Straps #Y02470 that fit the TwoTimer and Four Timer hitch-mount platform bike racks will not work on their HoldUp carriers. I confirmed this with my contact at Yakima. The Hold-Up carrier cannot be retro-fitted with larger straps…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Replacement Wheel Strap Recommendation for Yakima Holdup Bike Rack

Product Page this Question was Asked From

Continue Researching