Replacement 1/2" Conical Tooth Washers for Draw-Tite Trailer Hitch 75659 for Honda Element

Question

Question:

Hi, So I have the Draw-Tite trailer hitch 75659 for a 2006 Honda Element. I lost the conical toothed washers to this hitch assembly. Will toothed washers work as a replacment?

asked by: Andrew Z

0

Expert Reply:

In order to install the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75659 which is a fit for a 2006 Honda Element, you'll need to be sure to use the included conical tooth washers which ensure the nuts don't loosen. We don't sell just the conical tooth washer separately but you might be able to get them from the hardware store. If not, I can't recommend this but I would probably just use standard washers and locknuts if I were you.

We do however sell complete hardware packs, the Replacement Hitch Hardware Kit part # RHK which have the washers you need.

expert reply by: Conner L

0

Answer 1

There is some fascia trimming required for the SC model of the 2008 Honda Element when you install the Draw-Tite trailer hitch receiver #75659.

view full answer...

Answer 2

None of the hitches we offer would have enough weight capacity for a tongue weight of 450 lbs. Highest we have is the etrailer part #e78KR which has tongue weight capacity of 350 lbs. Even still you'd be limited by the capacity of the vehicle…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Replacement 1/2" Conical Tooth Washers for Draw-Tite Trailer Hitch 75659 for Honda Element

Products Featured in This Question

Continue Researching