Recommended Trailer Hitch Fit for a 2023 Kia EV6

Question

Question:

Looking for a trailer hitch for a 2023 Kia EV six

asked by: Doug H

1

Helpful Expert Reply:

I checked with Draw-Tite and was able to confirm that the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT85GR is a fit for a 2023 Kia EV6. It's also our only confirmed option at this time. It features a bolt-on install without any drilling required. It also has a class III rating with a 2" opening which is great for everything from hitch mounted accessories like bike racks and cargo carriers to towing.

Please note, if you will be towing then you'll also need a few other items like the T-One Vehicle Wiring Harness part # TK65VR and Curt Towing Starter Kit part # C45534.

expert reply by: Conner L

1

Answer 1

Hello Kristian, We have only completed an installation of the Draw-Tite #DT85GR on a 2022 Kia EV6. Since the frame design has remained the same through the 2024 model, the measurement from the ground to the inside top of the receiver is approximately…

view full answer...

Answer 2

Yes, it does! The lower fascia of your 2024 Kia EV6 will need to have a 2-1/4" x 3" cut made for the 2" receiver to protrude beneath your vehicle. This is common amongst every hitch that has been made for the 2024 EV6. The Draw-Tite…

view full answer...

Answer 3

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT85GR will fit your 2023 Kia EV6 GT. While we have not personally fit this on a GT in our facility Draw-Tite confirmed it will fit your GT trim. I have included an installation video below for…

view full answer...

Answer 4

Hey Lenny, when we installed the Draw Tite hitch part #DT85gr on a similar Kia EV6 we found that the top of the hitch opening measured 10-1/2 inches from the ground.

view full answer...

Answer 5

I have seen the Draw-Tite Max-Frame Trailer Hitch Receiver #DT85GR installed on the GT models of your 2022 Kia EV6. While I have never seen a 1st edition like yours fit with the receiver I see no reason why it will not fit since the 1st edition was a…

view full answer...

Answer 6

I was indeed able to verify a trailer hitch receiver fit for your 2023 Kia EV6. I checked with the manufacturer for you, and the correct fit for your Kia is the following: - Draw-Tite Max-Frame Trailer Hitch Receiver #DT85GR

view full answer...

Answer 7

Hey Patrick, yes we can confirm that the Stealth hitch part #SH48GR does fit the 2024 Kia EV6 Wind RWD model!

view full answer...

Answer 8

If you would like to use the Swagman E-Spec #S94FR, to carry your pair of E-bikes, you can do so by using a hitch receiver that you can bolt or weld to the frame. The Curt Adjustable Width Trailer Hitch Receiver for RVs, #13703, is a universal,…

view full answer...

Answer 9

I have a great solution for you. Even though the independently-adjusting cradles on the Yakima OnRamp #Y36FR eliminate the need of a bike frame adapter bar, the OnRamp is not safe to use on the back of a flat-towed vehicle. I I confirmed with the…

view full answer...

Answer 10

Currently the Draw-Tite Max-Frame Trailer Hitch Receiver #DT85GR is the only receiver we carry for your 2022 Kia EV6. Once Draw-Tite, Stealth or EcoHitch creates a hidden receiver and releases it to us we will add it to our website under the vehicle…

view full answer...

Answer 11

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT85GR is custom fit for your 2022 Kia EV6. This receiver has a 2" x 2" opening allowing you a larger selection of ball mounts and hitch mounted accessories. I recommend installing the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended Trailer Hitch Fit for a 2023 Kia EV6

Products Featured in This Question

Continue Researching