Are There Replacement Tires and Wheels for Trailer Valet 5X Swivel Jack and Trailer Mover

Question

Question:

Can I purchase the solid rubber tires for a 5X mounted on new rims? Thank you

asked by: Roger C

0

Expert Reply:

We do offer new tires for the Trailer Valet 5X Swivel Jack and Trailer Mover part # STC-V211, the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover part # TVXLSR but not the wheels so you will need to reuse the existing.

expert reply by: Conner L

0

Answer 1

First off, thanks for the kind words! We appreciate you trusting us with your business! I looked up the Caravan Mover that you referenced and found it to be quite interesting. I wish we carried it or something very similar, but the closest thing we…

view full answer...

Answer 2

The replacement parts you need will be the pneumatic Trailer Valet Tire, #TVTR & the Replacement Inner Tire, #TVIT. Unfortunately, the newer Solid Rubber Tire, #TVXLSR will not work on the Trailer Valet versions that use pneumatic tires.

view full answer...

Answer 3

If the pneumatic tires on your Trailer Valet #STC-V211 are needing to be aired up each time you use your trailer I suggest either using a tire sealer product like Slime Tire Sealant #SLM10007 or if that does not solve the issue replacing your…

view full answer...

Answer 4

We have solid rubber replacement tires for the Trailer Valet available. The Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR will fit Trailer Valet trailer dolly models XL, XL Pro, MV, TVXL25, TVXL2, and TVXLV2. This includes (1)…

view full answer...

Answer 5

Good morning, Matt. We do offer a replacement tire for the Trailer Valet 5X Swivel Jack and Trailer Mover part #STC-V211, the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover part #TVXLSR. There is no replacement wheel available though.…

view full answer...

Answer 6

The Trailer Valet that the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR can not be used on your Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 as confirmed by Trailer Valet, due to the fact that the original hubs on…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Are There Replacement Tires and Wheels for Trailer Valet 5X Swivel Jack and Trailer Mover

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching