Replacement Solid Rubber Tire for Trailer Valet Trailer Mover

Question

Question:

I want to buy 2 solid tires for my trailer valet

asked by: Jeff

0

Expert Reply:

We have solid rubber replacement tires for the Trailer Valet available.

The Replacement Solid Rubber Tire for Trailer Valet Trailer Mover # TVXLSR will fit Trailer Valet trailer dolly models XL, XL Pro, MV, TVXL25, TVXL2, and TVXLV2. This includes (1) tire, so if you are needing (2) tires you would just need to select a quantity of (2).

expert reply by: Scott S

0

Answer 1

Hey Frank, we do have replacement tires for the Trailer Valet jacks but it depends on what type of wheel you have currently. If you have a solid rubber tire the replacement you'd want is the part #TVXLSR, or if you have a setup that has an inner…

view full answer...

Answer 2

The Trailer Valet that the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR can not be used on your Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 as confirmed by Trailer Valet, due to the fact that the original hubs on…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Nice setup Jeff, happy to help! Since you've already ordered the B&W Turnoverball for your 2019 Ram 2500, my recommendation is the B&W Companion Sliding 5th Wheel Hitch #BWRVK3400-5W that's designed for the Turnoverball system.…

view full answer...

Answer 10

Hey Shayne, yes the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND that you referenced would need the included spacers to install in place of a Lippert 1716 pin box as that pin box is 1/2 inch wider. What camper do you have? At this time…

view full answer...

Answer 11

Hey Brian, the Blind Spot Monitoring System for Towable Campers, Travel Trailers, and 5th Wheels Up to 30' Long #CU65XR that you referenced can give you a blind spot monitoring system but its not going to integrate into your vehicle wiring. It is…

view full answer...

Answer 12

Hello Chris, thanks for getting in touch. I do have a resource that will help you determine the exact center hole location for your 2019 Ram 2500 with the 6-1/2' bed. Take a look at the instruction manual for the B&W Turnoverball Gooseneck…

view full answer...

Replacement Solid Rubber Tire for Trailer Valet Trailer Mover

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching