How To Find Correct Replacement Disc Brakes, Rotors, Hubs, and Bearings for a Boat Trailer
Published 02/16/2023
Question:
Hi, I have a trailer for my 2005 Centurion Avalanche Wake Boat with Trailer Buddy parts such as axles, brakes, etc. I have replaced the acuator but now want to replace the rotors, calipers and bearings and bearing seals. Can you please advise on the parts I need? Thanks
asked by: Shane S
Expert Reply:
I can certainty provide you with the information you need to select these parts yourself but as far as giving you a list of parts, that's not going to happen unfortunately as there are no resources available to look this stuff up. That said, to get started you'll need to know your axle capacity. The axle capacity can be found on the axle tag in the center of the beam. If it's a 3,500 lb axle which is most common then you could use a kit like the Kodiak Disc Brake Kit part # KOD67FR. This kit is complete and comes with everything you need such as the rotors/hubs, calipers, caliper mounting brackets, and bearings/seals.
If you have a different axle capacity, you can simply choose another kit from the list below.
Product Page this Question was Asked From
Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: What to Know About the Kodiak Disc Brake Kit
- Video: The Low-Down on the Kodiak Disc Brake Kit
- Video: An In-Depth Look at the Kodiak Disc Brakes
- Search Results: trailer brakes
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - Oil
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Replacement Caliper and Bracket for the Kodiak Disc Brake Kit item # K2R35D
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Q&A: Caliper Mounting Bracket For Kodiak 225 Brake Caliper
- Q&A: What Is The Difference Between Caliper Brackets KCMB10RD And KCMB10HRD
- Q&A: Replacement Caliper Mounting Bracket for a CMB-10-UA Over the Hub and/or Stainless Steel Bracket
- Q&A: Kodiak Disc Brakes For 3,500 lb Axles on Travel Trailer
- Q&A: Bolt Hole Pattern of Replacement Mounting Bracket for Kodiak Disc Brake Caliper # KCMB10RD
- Q&A: Will 12" Wheels Fit Disc Brakes on Trailer
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: brake mounting flange
- Search Results: accessories and parts
- Search Results: 3500 lbs axle trailer brakes
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Brakes
