Roadmaster Rear Anti-Sway Bar that Fits 2020 Ford F-350 Dually Item # RM-1139-193

Question

Question:

Roadmaster Rear Anti-Sway Bar Item # RM-1139-193 Will this fit my 2020 4x4 f350 Dually?

asked by: Matt

0

Expert Reply:

Yes, the Roadmaster sway bar part # RM-1139-193 does fit your 2020 Ford F-350 dually. It actually was designed specifically for the dually models.

expert reply by: Jameson C

0

Answer 1

Hey Roger. The Roadmaster Rear Anti-Sway Bar item #RM93VR weighs 51 lbs. You would need to check with a Ford parts department to see how much the stock one weighs on your F-350. The Roadmaster Rear Anti-Sway Bar item #RM93VR is confirmed to fit the…

view full answer...

Answer 2

Hey Matt, so the biggest difference between the Hellwig and Roadmaster sway bars that fit your 2022 Ford F-350 is the diameter of them which is what directly influences how stiff they are. The Hellwigs are a smaller diameter than the Roadmaster so…

view full answer...

Answer 3

Hey John, welcome back! Happy to hear those Timbrens are working out for you. You're going to want the thickest sway bar that fits your truck. It will help with that top heavy and leaning feeling when you're taking turns. I've got two…

view full answer...

Answer 4

For your 2019 Ford F-350 Super Duty DRW I recommend the Roadmaster Rear Anti-Sway Bar #RM-1139-193 and the Roadmaster Front Anti-Sway Bar #RM-1139-180.

view full answer...

Answer 5

I have a solution to correct the sway and enhance the suspension on your 2017 F-350 Super Duty with the single rear wheels, but the Roadmaster Sway Bar #RM-1139-193 is only designed for use on dually trucks. Because most sway is caused by unevenly…

view full answer...

Answer 6

Hey John, Since body lifts only move the body away from the frame and don't change the distance between the frame and suspension the lift should be irrelevant to fitment in your case. For anti-sway bars I recommend the Roadmaster Front Anti-Sway…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Roadmaster Rear Anti-Sway Bar that Fits 2020 Ford F-350 Dually Item # RM-1139-193

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching