Does T-One Wiring Harness for 2014 Volkswagen Jetta Use Round Pins

Question

Question:

I have a 2014 jetta and the connections in the car are flat and will mate your harness. The connections in the trailer are round pins in a flat connector. What kind of connector does your harness have where it mates with the trailer?

asked by: Phillip H

0

Expert Reply:

The 4-Wayflat connector on the T-One Wiring Harness # 118572 for your 2014 Volkswagen Jetta does use round pin connections like it sounds like you're describing. So you should be good to go!

I've attached an installation video of this harness on a 2014 Jetta as well as a photo showing what the 4-Way flat connection on this harness will look like.

I also recommend picking up the wiring brackets # 18144 and # C57202 to secure the connector near your hitch receiver for easy access.

expert reply by: Jon G

0

Vehicle Side 4-Way Flat Connector
(click to enlarge)

Answer 1

Hello Greg, Yes, we do have a hitch for your 2014 TDI Jetta Sportswaygen. You will want the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #24866. On the product page the information can be a little confusing. I…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Does T-One Wiring Harness for 2014 Volkswagen Jetta Use Round Pins

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching