Will Edge EZ Programmer for 1999 Dodge Ram with Cummins Hurt Transmission

Question

Question:

I have a 99 dodge Cummins 5.9 with automatic transmission will the edge ez hurt my trans with out upgradeing the transmission please let me know need for towing camper

asked by: Brian J

1

Helpful Expert Reply:

As long as you aren't really being hard on the transmission of your 1999 Ram 3500 with the 5.9 24 valve Cummins the Edge EZ # EZD1000A would not cause the transmission to fail. By that I mean not towing over the capacity of the truck or being super aggressive with the throttle.

expert reply by: Jameson C

1

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

Hey Kyle! The Pacbrake Alpha HD Air Bag Suspension Kit #PB22RV installs in the same location as most fifth wheel and gooseneck brackets. I would expect to have to do some drilling to install these with your B&W Turnoverball. Instead, I recommend…

view full answer...

Answer 3

Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…

view full answer...

Answer 4

Hey Bruce! The outside dimensions of the Double Rocker Switch #37212015 including the faceplate are 2.86" wide x 2.437" high. It is also available in black #37212235 and brown #37212145. What are you using the switch for?

view full answer...

Answer 5

Hey Dave. The T5079 RV Designer Entrance Door Lock item #RD68SR is made of a die-cast zinc alloy for the housing and handles. The strike plate, plunger load pins and plunger end plates are made of steel. The parts are then black powder coated and…

view full answer...

Answer 6

Hello Bob, thanks for reaching out. We do have a lock that will work with the etrailer Adjustable 2-Ball Mount #e66PR. For that I recommend the following: - etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span -…

view full answer...

Answer 7

The Edge EZ programmer part #EP30200 is the correct fit for your 1998 Dodge Ram with a 5.9 Cummins. This will give you an additional 65 horsepower and 180 ft lbs of torque. This will give you a noticeable bump in power but not a crazy amount increase…

view full answer...

Answer 8

For your Edge Evo HT 36030, I recommend using the same setting as you would for any of the tuners when hauling a load. I recommend using the "Tow" setting for light load tow.

view full answer...

Answer 9

I have a solution for you, but the Edge Module part #EZD1000A is not a fit for the 2005 Dodge Ram Cummins. Instead you would want the #EP36040 if you have the 325 horsepower Cummins or the part #EP30204 for if you have the Common Rail 24 valve that…

view full answer...

Answer 10

Your Edge EvoHT2 #EP36040 is also a confirmed fit for your 2001 Dodge Cummins. This controller is only able to be used on one vehicle at a time, so setting that tuned vehicle back to stock will allow it to be used on another vehicle. Since he said he…

view full answer...

Answer 11

I checked out the installation instructions for the EvoHT2 Tuner, part #EP36040 and found that on page 18 it is explained how to return the engine tuning to stock. From the main menu you will need to select 'Tune Vehicle'. Then select…

view full answer...

Answer 12

Superchips and Edge are actually made by the same company so the tunes you'll get between the two will yield the same power gains. The advantage to the Superchips like the part #SU4845 is that you aren't paying for additional features like a…

view full answer...